2013

1. Kaczmarczyk, S. and Picton, P. (2013) The prediction of nonlinear responses and active stiffness control of moving slender continua subjected to dynamic loadings in a vertical host structure. International Journal of Acoustics and Vibration. 18(1), pp. 39-44. 1027-5851.
2. Kabeer, S., Attenburrow, G., Picton, P. and Wilson, M. (2013) Development of an image analysis technique for measurement of Poisson’s ratio for viscoelastic materials: application to leather. Journal of Materials Science. 48(2), pp. 744-749. 0022-2461.

2012

1. Al-Sherbaz, A., Dravid, R., Svennevik, E. and Picton, P. (2012) iSurvival: a collaborative mobile network system for disaster management. 13th International Federation for Information Processing (IFIP) WG 5.5 Working Conference on Virtual Enterprises, PRO-VE 2012, Bournemouth, UK, 01-03 October 2012. Bournemouth: Springer. 9783642327742.
2. Picton, P. (2012) Teaching ultrasonics using spreadsheets. International Conference on Engineering Education (ICEE 2012), Turku, Finland, 30 July - 03 August 2012. Turku, Finland: Turku University of Applied Sciences. 9789522163196.

2011

1. Attenburrow, G. E., Wang, Y., Picton, P. and Turner, S. J. (2011) The subjective measurement of leather handle by descriptive sensory analysis. Journal of the American Leather Chemists Association. April, pp. 134-139. 0002-9726.
2. Wang, Y., Picton, P., Turner, S. J. and Attenburrow, G. E. (2011) Predicting leather handle like an expert by artificial neural networks. Applied Artificial Intelligence. 25(2), pp. 180-192. 0883-9514.
3. Jamali, S., Mills, D. J., Mabbutt, S. J. and Picton, P. (2011) Effect of surface preparation on the protective efficiency and adhesion of organic coatings applied to steel. European Corrosion Congress (EUROCORR) 2011: Developing Solutions for the Global Challenge, Stockholm, Sweden, 04-08 September 2011. Stockholm, Sweden: Dechema.
4. Kaczmarczyk, S. and Picton, P. (2011) The prediction of nonlinear responses and active stiffness control of moving slender continua subjected to dynamic loadings in a vertical host structure. 18th International Congress on Sound and Vibration (ICSV 18), Rio de Janeiro, Brazil, 10-14 July 2011. Rio de Jainero, Brazil: Curran Associates Inc. 9781618392596.
5. Picton, P. and Kaczmarczyk, S. (2011) A software tool for calculating the relative amplitude of ultrasonic waves at boundaries. 18th International Congress on Sound and Vibration (ICSV 18), Rio de Janeiro, Brazil, 10-14 July 2011. Rio de Janeiro, Brazil: Curran Associates Inc. 9781618392596.

2010

1. Remy, G., Kazemian, H. and Picton, P. (2010) Application of neural fuzzy controller for streaming video over bluetooth 1.2. Neural Computing and Applications. 19(10) 0941-0643.
2. Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2010) Problem solving and creativity in engineering: conclusions of a three year project involving reusable learning objects and robots. Paper presented to: Engineering Education 2010 (EE 2010), Aston University, Birmingham, England, 06-08 July 2010.
3. Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2010) Problem solving and creativity in engineering: conclusions of a phenomenographic study of novices and professionals. Paper presented to: University of Northampton Learning and Teaching Conference: Learning Dialogues, University of Northampton, UK, 13 May 2010.
4. Varley, M., Peak, M. and Picton, P. (2010) Enhancing student understanding of concepts in engineering and other STEM areas. International Conference on Engineering Education (ICEE 2010): Engineering Education and Research for Society, Gliwice, Poland, 18-22 July 2010. 1562-3580.
5. Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2010) Problem solving and creativity in engineering: conclusions of a three year PBL project involving reusable learning objects and robots. International Conference on Engineering Education (ICEE 2010): Engineering Education and Research for Society, Gliwice, Poland, 18-22 July 2010. 1562-3580.
6. Kazemian, H., Remy, G. and Picton, P. (2010) Supervised neural fuzzy schemes in video transmission over bluetooth. 20th International Conference on Artificial Neural Networks (ICANN 2010), Thessaloniki, Greece, 15-18 September 2010. Springer-Verlag. 9783642158257.
7. Picton, P. and Zaid, M. (2010) The development of courses for the NDT industry in collaboration with the industry body and the students themselves. International Conference on Engineering Education (ICEE 2010): Engineering Education and Research for Society, Gliwice, Poland, 18-22 July 2010. 1562-3580.

2009

1. Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2009) Problem solving and creativity in engineering: perceptions of novices and professionals. World Congress on Engineering and Computer Science 2009, San Francisco, USA, 20 - 22 October 2009. Hong Kong: Newswood Limited. 9789881701268.

2008

1. Picton, P. and Capp, M. (2008) Relaying scene information to the blind via sound using cartoon depth maps. Image and Vision Computing. 26(4), pp. 570-577. 0262-8856.
2. Marais, J., Taylor, D. N., Denman, A. R., Phillips, C., Picton, P. and Monk, D. (2008) Automatic segmentation of the left ventricle for image registration in an emission based attenuation correction technique. Poster presented to: British Nuclear Medicine Society (BNMS) 36th Annual Meeting, Edinburgh, 12-14 May 2008.
3. Adams, J. P., Turner, S. J., Kaczmarczyk, S., Picton, P. and Demian, P. (2008) Problem solving and creativity for undergraduate engineers: findings of an action research project involving robots. International Conference on Engineering Education (ICEE 2008) - "New Challenges in Engineering Education and Research in the 21st Century", Budapest, Hungary, 27-31 July 2008. International Network for Engineering Education & Research (iNEER).
4. Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2008) Problem solving and creativity in engineering: findings of interviews with experts and novices. International Conference on Engineering Education (ICEE 2008) - "New Challenges in Engineering Education and Research in the 21st Century", Budapest, Hungary, 27-31 July 2008. International Network for Engineering Education & Research (iNEER).

2007

1. Wang, Y., Picton, P., Turner, S. J. and Attenburrow, G. E. (2007) A neural network approach to investment the objective and subjective measurements of leather handle. Paper presented to: Symposium on Methods of Artificial Intelligence (AI-METH 2007), Gliwice, Poland, November 2007. Poland: Silesian University of Technology.
2. Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2007) Improving problem solving and encouraging creativity in engineering undergraduates. Proceedings of the International Conference on Engineering Education, Coimbra, Portugal, 3-7 September 2007. New York: Springer. 9789728855141.
3. Kabeer, S., Attenburrow, G. E., Picton, P. and Wilson, M. (2007) The application of computerised image analysis to determine physical properties of leather. Paper presented to: XXIX Congress of the International Union of Leather Technologists and Chemists Societies, Washington DC, USA, 20-24 June 2007.

2006

1. Samamaliki-Simpson, R., Kaczmarczyk, S., Picton, P. and Turner, S. J. (2006) Non-linear modal interactions in a suspension rope system with time-varying length. Applied Mechanics and Materials. 5-6, pp. 217-224. 1660-9336.

2005

1. Nolle, L., Goodyear, A., Hopgood, A. A., Picton, P. and Braithwaite, N. S. J. (2005) Improved simulated annealing with step width adaptation for Langmuir probe tuning. Engineering Optimization. 37(5), pp. 463-477. 1029-0273.

2004

1. Al-Kuzee, J., Matsuura, T., Goodyear, A., Nolle, L., Hopgood, A. A., Picton, P. and Braithwaite, N. S. J. (2004) Optimization of plasma etch processes using evolutionary search methods with in-situ diagnostics. Plasma Sources Science and Technology. 13(4), pp. 612-622. 1361-6595.

2002

1. Nolle, L., Goodyear, A., Hopgood, A. A., Picton, P. and Braithwaite, N. S. J. (2002) Automated control of an actively compensated Langmuir probe system using simulated annealing. Knowledge-Based Systems. 15(5-6), pp. 349-354. 0950-7051.