Items where Subject is "T Technology > TP Chemical technology > TP1175 Organic coatings"

2016

• Mills, D. J. and Bingham, R. (2016) Editorial. Progress in Organic Coatings. 102(A), p. 1. 0300-9440.

2013

• Jamali, S. S. (2013) Study on corrosion protection of organic coatings using electrochemical techniques: developing electrochemical noise method, effective of surface preparation and inhomogeneity of organic coatings. Doctoral thesis. The University of Northampton.

2012

• Mills, D. J., Jamali, S. and Paprocka, K. (2012) Investigation into the effect of nano-silica on the protective properties of polyurethane coatings. Surface and Coatings Technology. 209, pp. 137-142. 0257-8972.
• Mills, D. J., Jamali, S. and Tobiszewski, M. T. (2012) Developing electrochemical measurements in order to assess anti-corrosive coatings more effectively. Progress in Organic Coatings. 74(2), pp. 385-390. 0300-9440.

2011

• Darowicki, K., Szocinski, M., Schaefer, K. and Mills, D. J. (2011) Investigation of morphological and electrical properties of the PMMA coating upon exposure to UV irradiation based on AFM studies. Progress in Organic Coatings. 71(1), pp. 65-71. 0300-9440.
• Jamali, S., Mills, D. J., Mabbutt, S. J. and Picton, P. (2011) Effect of surface preparation on the protective efficiency and adhesion of organic coatings applied to steel. In: EUROCORR 2011: Developing Solutions for the Global Challenge. Stockholm, Sweden: Dechema.
• Mills, D. J., Paprocka, K. and Jamali, S. (2011) Investigation into the effect of nano-silica particles on the protective properties of polyurethane coatings. In: EUROCORR 2011: Developing Solutions for the Global Challenge. Stockholm, Sweden: Dechema.

2010

• Darowicki, K., Szocinski, M., Schaefer, K. and Mills, D. J. (2010) The influence of UV light on performance of poly(methyl methacrylate) in regard to dye-sensitised solar cells. ECS Transactions. 24(1), pp. 127-136. 1938-5862.
• Jamali, S., Mills, D. J. and Woodcock, C. P. (2010) Ways of increasing the effectiveness of the electrochemical noise method for assessment of organic coatings on metal. ECS Transactions. 24(1), pp. 115-125. 1938-5862.
• Jamali, S., Mills, D. J. and Woodcock, C. P. (2010) Ways of increasing the effectiveness of the electrochemical noise method for assessment of organic coatings on metal. ECS Transactions. 24(1), pp. 115-125. 1938-5862.
• Mills, D. J. (2010) Advances in Corrosion Protection by Organic Coatings: Christ's College, Cambridge 13th-17th September 2009: conference report. Corrosion Management. 98, p. 8. 1355-5243.
• Mills, D. J. and Schaefer, K. (2010) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Progress in Organic Coatings. 69(2), pp. 193-198. 0300-9440.

2009

• Darowicki, K., Szocinski, M., Schaefer, K. and Mills, D. J. (2009) The influence of UV light on performance of poly(methyl methacrylate) in regard to dye-sensitised solar cells. Invited Presentation presented to: Fifth International Conference on Advances in Corrosion Protection by Organic Coatings, Cambridge, 14 - 18 September 2009. (Unpublished)
• Mills, D. J. (2009) Application of electrochemical techniques to organic coatings (AETOC 2009). Corrosion Engineering, Science and Technology. 44(6), pp. 405-406. 1478-422X.
• Mills, D. J. (2009) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, June 2009. (Unpublished)
• Mills, D. J. (2009) Use of electrochemical noise method (ENM) to assess and monitor anti-corrosive organic coatings. Lecture presented to: 8th MULTIPROTECT Training Course on the Use of Electrochemical Techniques (part of 6th International Workshop on Application of Electrochemical Techniques to Organic Coatings (AETOC 2009)), Grado, Italy, 15 April 2009. (Unpublished)
• Mills, D. J. and Schaefer, K. (2009) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Invited Presentation presented to: Sixth International Workshop on Application of Electrochemical Techniques to Organic Coatings (AETOC 2009), Grado, Italy, 15 - 18 April 2009. (Unpublished)

2008

• Mills, D. J. (2008) Comparison of AC and DC methods for assessing organic coatings on steel. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 17 January 2008. (Unpublished)
• Mills, D. J. (2008) Use of electrochemical methods to monitor the performance of organic coatings in the field. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 17 January 2008. (Unpublished)
• Mills, D. J. (2008) Comparison of ENM, EIS and DC resistance for assessing and monitoring anti-corrosive coatings. Journal of Corrosion Science and Engineering. 8 1466-8858.
• Mills, D. J., Broster, M. and Razaq, I. (2008) Continuing work to enable electrochemical methods to be used to monitor the performance of organic coatings in the field. Progress in Organic Coatings. 63(3), pp. 267-271. 0300-9440.
• Mills, D. J. and Schaefer, K. (2008) Investigation into influence of different surface preparation method on performance of anti – corrosive organic coatings on steel. Poster presented to: EUROCORR 2008: Managing Corrosion for Sustainability, Edinburgh, 7-11 September 2008. (Unpublished)
• Mills, D. J. and Woodcock, C. P. (2008) Use of electrochemical noise method and electrochemical impedence spectroscopy for investigation of a set of organic coatings on steel. In: Proceedings of the EuroCorr 2008 - Managing Corrosion for Sustainability. Dechema.
• Schaefer, K. and Mills, D. J. (2008) The influence of water jetting on subsequent performance of organic coatings on steel. Symposium presented to: University of Northampton Research Day, Northampton, 1 July 2008. (Unpublished)
• Woodcock, C. P., Mills, D. J. and Singh, H. T. (2008) Using novel electrochemical test methods to aid in the development of low volatile organic compound (VOC) coatings. Journal of Corrosion Science and Engineering. 8 1466-8858.

2007

• Mabbutt, S. J., Mills, D. J. and Woodcock, C. P. (2007) Developments of the electrochemical noise method (ENM) for more practical assessment of anti-corrosion coatings. Progress in Organic Coatings. 59(3), pp. 192-196. 0300-9440.
• Mills, D. J. (2007) Application of electrochemical techniques to organic coatings. Corrosion Engineering Science and Technology. 42(4), pp. 285-286. 1478-422X.
• Mills, D. J., Broster, M. and Rosaq, I. (2007) Continuing work to enable electrochemical methods to be used to monitor the performance of organic coatings in the field. In: Proceedings of Advances in Electrochemical Techniques to Examine Organic Coatings. Vigo, Spain: University of Vigo.
• Mills, D. J. and Donoghue, S. S. (2007) Investigation into environmental interaction of organic coatings using novel techniques. In: Proceedings of The European Corrosion Congress (Eurocorr 2007). Frankfurt am Main, Germany: Dechema.
• Woodcock, C. P. (2007) A review and development of accelerated test methods for anti-corrosive organic coatings. Doctoral thesis. The University of Northampton.

2003

• Mills, D. J., Mabbutt, S. J. and Bierwagen, G. (2003) Investigation into mechanism of protection of pigmented alkyd coatings using electrochemical and other methods. Progress in Organic Coatings. 46(3), pp. 176-181. 0300-9440.

2002

• Mabbutt, S. J., Bierwagen, G. and Mills, D. J. (2002) New experimental arrangement for the acquisition of electrochemical noise data from high resistance organic anti-corrosive coatings. Anti-Corrosion Methods and Materials. 49(4), pp. 264-269. 0003-5599.

2001

• Mabbutt, S. J. and Mills, D. J. (2001) Recent UK work investigating anti-corrosive organic coatings using the electrochemical noise method (ENM). Surface Coatings International, Part B: Coatings Transactions. 84(4), pp. 277-283. 1742-0261.

2000

• Mabbutt, S. J. (2000) Investigation into corrosion protection by coatings using the electrochemical noise method. Doctoral thesis. University of Leicester.