Article

1. Akid, R. and Mills, D. J. (2001) A comparison between conventional macroscopic and microscopic scanning electrochemical methods to evaluate galvanic corrosion. Corrosion Science. 43(7), pp. 1203-1216. 0010-938X.
2. Behzadnasab, M., Mirabedini, S. M., Kabiri, K. and Jamali, S. (2011) Corrosion performance of epoxy coatings containing silane treated ZrO2 nanoparticles on mild steel in 3.5 % NaCl solution. Corrosion Science. 53(1), pp. 89-98. 0010-938X.
3. Darowicki, K., Szocinski, M., Schaefer, K. and Mills, D. J. (2010) The influence of UV light on performance of poly(methyl methacrylate) in regard to dye-sensitised solar cells. ECS Transactions. 24(1), pp. 127-136. 1938-5862.
4. Jamali, S., Mills, D. J. and Woodcock, C. P. (2010) Ways of increasing the effectiveness of the electrochemical noise method for assessment of organic coatings on metal. ECS Transactions. 24(1), pp. 115-125. 1938-5862.
5. Jamali, S., Mills, D. J. and Woodcock, C. P. (2010) Ways of increasing the effectiveness of the electrochemical noise method for assessment of organic coatings on metal. ECS Transactions. 24(1), pp. 115-125. 1938-5862.
6. Mabbutt, S. J., Bierwagen, G. and Mills, D. J. (2002) New experimental arrangement for the acquisition of electrochemical noise data from high resistance organic anti-corrosive coatings. Anti-Corrosion Methods and Materials. 49(4), pp. 264-269. 0003-5599.
7. Mabbutt, S. J. and Mills, D. J. (2001) Recent UK work investigating anti-corrosive organic coatings using the electrochemical noise method (ENM). Surface Coatings International, Part B: Coatings Transactions. 84(4), pp. 277-283. 1742-0261.
8. Mabbutt, S. J., Mills, D. J. and Woodcock, C. P. (2007) Developments of the electrochemical noise method (ENM) for more practical assessment of anti-corrosion coatings. Progress in Organic Coatings. 59(3), pp. 192-196. 0300-9440.
9. Mills, D. J. (2010) Advances in Corrosion Protection by Organic Coatings: Christ's College, Cambridge 13th-17th September 2009: conference report. Corrosion Management. 98, p. 8. 1355-5243.
10. Mills, D. J. (2010) Dealing with technical enquiries. Corrosion Management. 98, p. 7. 1355-5243.
11. Mills, D. J. (2010) Report on EuroCorr 2010 held in Moscow 13th-17th September. Corrosion Management. 98, pp. 6-7. 1355-5243.
12. Mills, D. J. (2010) Dissemination of corrosion information. Corrosion Management. 97 1355-5243.
13. Mills, D. J. (2010) Eurocorr 2009: 'Corrosion from the nanoscale to the plant' – part 5. Corrosion Engineering, Science and Technology. 45(4), pp. 251-256. 1478-422X.
14. Mills, D. J. (2010) Eurocorr 2009: 'Corrosion from the nanoscale to the plant' – part 4. Corrosion Engineering, Science and Technology. 45(3), pp. 183-186. 1478-422X.
15. Mills, D. J. (2010) Anodic protection. Corrosion Management. 95 1355-5243.
16. Mills, D. J. (2010) Eurocorr 2009: 'Corrosion from the nanoscale to the plant' – part 3. Corrosion Engineering, Science and Technology. 45(2), pp. 107-112. 1478-422X.
17. Mills, D. J. (2010) Eurocorr 2009: 'Corrosion from the nanoscale to the plant' – part 2. Corrosion Engineering, Science and Technology. 45(1), pp. 3-9. 1478-422X.
18. Mills, D. J. (2009) Application of electrochemical techniques to organic coatings (AETOC 2009). Corrosion Engineering, Science and Technology. 44(6), pp. 405-406. 1478-422X.
19. Mills, D. J. (2009) EuroCorr 2009: from the nanoscale to the plant. Corrosion Engineering, Science and Technology. 44(6), pp. 403-404. 1478-422X.
20. Mills, D. J. (2009) EuroCorr 2008: managing corrosion for sustainability - part 4. Corrosion Engineering, Science and Technology. 44(4), pp. 241-246. 1478-422X.
21. Mills, D. J. (2009) EuroCorr 2008: managing corrosion for sustainability - part 3. Corrosion Engineering, Science and Technology. 44(2), pp. 81-87. 1478-422X.
22. Mills, D. J. (2009) EuroCorr 2008: managing corrosion for sustainability - part 2. Corrosion Engineering, Science and Technology. 44(1), pp. 2-7. 1478-422X.
23. Mills, D. J. (2008) EuroCorr 2008: managing corrosion for sustainability - part 1. Corrosion Engineering, Science and Technology. 43(4), pp. 273-280. 1478-422X.
24. Mills, D. J. (2008) Comparison of ENM, EIS and DC resistance for assessing and monitoring anti-corrosive coatings. Journal of Corrosion Science and Engineering. 8 1466-8858.
25. Mills, D. J. (2007) Application of electrochemical techniques to organic coatings. Corrosion Engineering Science and Technology. 42(4), pp. 285-286. 1478-422X.
26. Mills, D. J. (2007) Eurocorr 2006: “Reliability management of technical systems” - Part 3. Corrosion Engineering Science and Technology. 42(1), pp. 185-190. 1478-422X.
27. Mills, D. J. (2007) Eurocorr 2006: “Reliability management of technical systems” - Part 1. Corrosion Engineering Science and Technology. 42(1), pp. 6-11. 1478-422X.
28. Mills, D. J. (2007) Eurocorr 2006: “Reliability management of technical systems” - Part 2. Corrosion Engineering Science and Technology. 42(1), pp. 92-98. 1478-422X.
29. Mills, D. J. (2007) Corrosion and health. Corrosion Management. 76, p. 8. 1355-5243.
30. Mills, D. J. (2007) Let it rust! Corrosion Management. 79, p. 8. 1355-5243.
31. Mills, D. J. (2007) Corrosion in concrete. Corrosion Management. 78, p. 8. 1355-5243.
32. Mills, D. J. (2007) Corrosion in the nuclear power industry. Corrosion Management. 77, p. 5. 1355-5243.
33. Mills, D. J. (2007) Electrochemical measurements: are they any use? Corrosion Management. 75, p. 6. 1355-5243.
34. Mills, D. J., Broster, M. and Razaq, I. (2008) Continuing work to enable electrochemical methods to be used to monitor the performance of organic coatings in the field. Progress in Organic Coatings. 63(3), pp. 267-271. 0300-9440.
35. Mills, D. J. and Hilbert, L. (2007) 14th Nordic Corrosion Congress. Corrosion Engineering Science and Technology. 42(4), pp. 283-284. 1478-422X.
36. Mills, D. J., Jamali, S. and Tobiszewski, M. T. (2012) Developing electrochemical measurements in order to assess anti-corrosive coatings more effectively. Progress in Organic Coatings. 74(2), pp. 385-390. 0300-9440.
37. Mills, D. J. and Schaefer, K. (2010) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Progress in Organic Coatings. 69(2), pp. 193-198. 0300-9440.
38. Woodcock, C. P., Mills, D. J. and Singh, H. T. (2008) Using novel electrochemical test methods to aid in the development of low volatile organic compound (VOC) coatings. Journal of Corrosion Science and Engineering. 8 1466-8858.

Conference or Workshop Item

1. Darowicki, K., Szocinski, M., Schaefer, K. and Mills, D. J. (2009) The influence of UV light on performance of poly(methyl methacrylate) in regard to dye-sensitised solar cells. Invited Presentation presented to: Fifth International Conference on Advances in Corrosion Protection by Organic Coatings, Cambridge, 14 - 18 September 2009.
2. Jamali, S. and Mills, D. J. (2010) Novel set-up for application of electrochemical noise measurement (ENM) on protective coatings. Paper presented to: 2nd International Conference Corrosion and Material Protection, Prague, Czech Republic, 19-22 April 2010.
3. Mills, D. J. (2011) Developments in electrochemical measurements in order to assess anti-corrosive coatings more effectively. Paper presented to: Advances in Electrochemical Techniques for Assessment of Organic Coatings, Belgium, May 2011.
4. Mills, D. J. (2010) Effect of different surface preparations on the corrosion behaviour of mild steel. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 10 December 2010.
5. Mills, D. J. (2010) Monitoring methods for protective coatings. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 16 July 2010.
6. Mills, D. J. (2010) Monitoring of anti-corrosive coatings using electrochemical techniques. Invited Presentation presented to: Institute of Corrosion’s Corrosion Engineering Division Symposium on Corrosion Monitoring, Warrington, England, 29 April 2010.
7. Mills, D. J. (2009) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, June 2009.
8. Mills, D. J. (2009) Use of electrochemical noise method (ENM) to assess and monitor anti-corrosive organic coatings. Lecture presented to: 8th MULTIPROTECT Training Course on the Use of Electrochemical Techniques (part of 6th International Workshop on Application of Electrochemical Techniques to Organic Coatings (AETOC 2009)), Grado, Italy, 15 April 2009.
9. Mills, D. J. (2008) Comparison of AC and DC methods for assessing organic coatings on steel. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 17 January 2008.
10. Mills, D. J. (2008) Use of electrochemical methods to monitor the performance of organic coatings in the field. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 17 January 2008.
11. Mills, D. J. and Jamali, S. (2010) Electrochemical characterization of mild steel after different surface preparations. Paper presented to: 51st Corrosion Science Symposium (CSS), University of Southampton, England, 01-03 September 2010.
12. Mills, D. J. and Lyon, S. (2007) The industrial coatings applicator training scheme. Investigation to promote a link with WJA. Paper presented to: Water Jetting Association Annual Conference (WJA) , Lutterworth, Leicestershire, 18 May 2007.
13. Mills, D. J. and Schaefer, K. (2009) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Invited Presentation presented to: Sixth International Workshop on Application of Electrochemical Techniques to Organic Coatings (AETOC 2009), Grado, Italy, 15 - 18 April 2009.
14. Mills, D. J. and Schaefer, K. (2008) Investigation into influence of different surface preparation method on performance of anti – corrosive organic coatings on steel. Poster presented to: EUROCORR 2008: Managing Corrosion for Sustainability, Edinburgh, 7-11 September 2008.
15. Mills, D. J., Woodcock, C. P. and Jamali, S. (2009) Novel arrangements and data analysis methods to enable the electrochemical noise method to assess coatings more effectively. Paper presented to: European Corrosion Congress (EUROCORR) 2009, Nice, France, 6-10 September 2009.
16. Schaefer, K. and Mills, D. J. (2008) The influence of water jetting on subsequent performance of organic coatings on steel. Symposium presented to: University of Northampton Research Day, Northampton, 1 July 2008.

Conference Proceedings

1. El-Madaani, F., Zaid, M., Gaydecki, P., Hussin, H. and Miller, G. (2006) Assessment of corrosion activity in reinforcing steel bars embedded within concrete using the inductive scanning technique. Paper presented to: 32nd Symposium on Quantitative Nondestructive Evaluation, Brunswick, Maine, USA, 31 July – 5 August 2005. Melville, New York: American Institute of Physics. 0735403120. (AIP conference proceedings; vol. 820)
2. Jamali, S., Mills, D. J., Mabbutt, S. J. and Picton, P. (2011) Effect of surface preparation on the protective efficiency and adhesion of organic coatings applied to steel. European Corrosion Congress (EUROCORR) 2011: Developing Solutions for the Global Challenge, Stockholm, Sweden, 04-08 September 2011. Stockholm, Sweden: Dechema.
3. Mills, D. J., Broster, M. and Rosaq, I. (2007) Continuing work to enable electrochemical methods to be used to monitor the performance of organic coatings in the field. Advances in Electrochemical Techniques to Examine Organic Coatings, Baiona, Spain, 20-23 April 2007. Vigo, Spain: University of Vigo.
4. Mills, D. J. and Donoghue, S. S. (2007) Investigation into environmental interaction of organic coatings using novel techniques. Proceedings of The European Corrosion Congress (Eurocorr 2007), Freiberg am Breisgau, Germany, 9-13 September 2007. Frankfurt am Main, Germany: Dechema.
5. Mills, D. J. and Jamali, S. (2010) Effect of different surface preparations prior to painting on the corrosion behaviour and surface activity of mild steel. European Corrosion Conference (EUROCORR) 2010: From Space Heights to Earth's Depths, Moscow, Russia, 13-17 September 2010. Frankfurt, Germany: Dechema.
6. Mills, D. J., Paprocka, K. and Jamali, S. (2011) Investigation into the effect of nano-silicaparticles on the protective properties of polyurethane coatings. European Corrosion Congress (EUROCORR) 2011: Developing Solutions for the Global Challenge, Stockholm, Sweden, 04-08 September 2011. Stockholm, Sweden: Dechema.
7. Mills, D. J. and Woodcock, C. P. (2008) Use of electrochemical noise method and electrochemical impedence spectroscopy for investigation of a set of organic coatings on steel. European Corrosion Congress (EuroCorr) 2008 - Managing Corrosion for Sustainability, Edinburgh, 7-11 September 2008. Dechema.
8. Zaid, M., El-Madaani, F., Gaydecki, P. and Miller, G. (2006) Automatic corrosion classification and quantification of steel reinforcing bars within concrete using image data generated by an inductive sensor. Paper presented to: 32nd Symposium on Quantitative Nondestructive Evaluation, Brunswick, Maine, USA, 31 July - 5 August 2005. Melville, New York: American Institute of Physics. 0735403120. (AIP conference proceedings, vol. 820)

Thesis

1. Woodcock, C. P. (2007) A review and development of accelerated test methods for anti-corrosive organic coatings. Doctoral thesis. The University of Northampton.

Honorary role

1. Mills, D. J. (2010) Member of Editorial Board. Corrosion Engineering, Science and Technology. Leeds: Maney Publishing. 1478-422X.