Items where Division is "University Faculties, Divisions and Research Centres - OLD > School of Applied Sciences (to 2009) > Engineering (to 2009)"

Article

• Akid, R. and Mills, D. J. (2001) A comparison between conventional macroscopic and microscopic scanning electrochemical methods to evaluate galvanic corrosion. Corrosion Science. 43(7), pp. 1203-1216. 0010-938X.
• Al-Kuzee, J., Matsuura, T., Goodyear, A., Nolle, L., Hopgood, A. A., Picton, P. and Braithwaite, N. S. J. (2004) Optimization of plasma etch processes using evolutionary search methods with in-situ diagnostics. Plasma Sources Science and Technology. 13(4), pp. 612-622. 1361-6595.
• Al-Sherbaz, A., Jassim, S. and Adams, C. (2008) Convergence in wireless transmission technology promises best of both worlds. SPIE Newsroom. 31 October
• Banerjee, J. R., Sobey, A. J., Su, H. and Fitch, J. P. (2008) Use of computer algebra in Hamiltonian calculations. Advances in Engineering Software. 39(6), pp. 521-525. 0965-9978.
• Banerjee, J. R., Su, H. and Jayatunga, C. (2008) A dynamic stiffness element for free vibration analysis of composite beams and its application to aircraft wings. Computers & Structures. 86(6), pp. 573-579. 0045-7949.
• Gaydecki, P., Fernandes, B., Quek, S., Benitez, D., Miller, G. and Zaid, M. (2007) Inductive and magnetic field inspection systems for rebar visualization and corrosion estimation in reinforced and pre-stressed concrete. Non Destructive Testing Evaluation. 22(4), pp. 255-298. 1058-9759.
• Gaydecki, P., Miller, G., Zaid, M., Fernandes, B. and Hussin, H. (2008) Detection of magnetic fields highly attenuated by the skin effect through a ferrous steel boundary using a super narrow-band digital filter. IEEE Transactions on Instrumentation and Measurement. 57(6), pp. 1171-1176. 0018-9456.
• Herrera, I. and Kaczmarczyk, S. (2009) The assessment of vibration absorption capacity of elevator's passengers. Journal of Physics: Conference Series. 181, 012081. 1742-6588.
• Jamali, S., Mills, D. J. and Woodcock, C. P. (2010) Ways of increasing the effectiveness of the electrochemical noise method for assessment of organic coatings on metal. ECS Transactions. 24(1), pp. 115-125. 1938-5862.
• Kaczmarczyk, S. (2007) Inaugural Lift Engineering School. Elevatori. 36(1), pp. 32-35. 1121-7995.
• Kaczmarczyk, S. (2005) Prediction of the influence of vibration on structural integrity of elevator suspension ropes. Key Engineering Materials. 293-294, pp. 761-768. 1013-9826.
• Kaczmarczyk, S., Iwankiewicz, R. and Terumichi, Y. (2009) The dynamic behaviour of a non-stationary elevator compensating rope system under harmonic and stochastic excitations. Journal of Physics: Conference Series. 181, 012047. 1742-6588.
• Kaczmarczyk, S. and Ostachowicz, W. (2003) Transient vibration phenomena in deep mine hoisting cables. Part 2: Numerical simulation of the dynamic response. Journal of Sound and Vibration. 262(2), pp. 245-289. 1095-8568.
• Kawaguti, K., Terumichi, Y., Takehara, S., Kaczmarczyk, S. and Sogabe, K. (2007) The study of the tether motion with time-varying length using the absolute nodal coordinate formulation with multiple nonlinear time scales. Journal of System Design and Dynamics. 1(3), pp. 491-500. 1881-3046.
• Mabbutt, S. J., Bierwagen, G. and Mills, D. J. (2002) New experimental arrangement for the acquisition of electrochemical noise data from high resistance organic anti-corrosive coatings. Anti-Corrosion Methods and Materials. 49(4), pp. 264-269. 0003-5599.
• Mabbutt, S. J. and Mills, D. J. (2001) Recent UK work investigating anti-corrosive organic coatings using the electrochemical noise method (ENM). Surface Coatings International, Part B: Coatings Transactions. 84(4), pp. 277-283. 1742-0261.
• Mabbutt, S. J., Mills, D. J. and Woodcock, C. P. (2007) Developments of the electrochemical noise method (ENM) for more practical assessment of anti-corrosion coatings. Progress in Organic Coatings. 59(3), pp. 192-196. 0300-9440.
• Maguire, M., Kaczmarczyk, S., Adams, J. P. and Smith, R. (2007) Modal parameters of a lift suspension system. Elevatori. 36(6), pp. 68-75. 1121-7995.
• Mills, D. J. (2009) EuroCorr 2008: managing corrosion for sustainability - part 2. Corrosion Engineering, Science and Technology. 44(1), pp. 2-7. 1478-422X.
• Mills, D. J. (2007) Application of electrochemical techniques to organic coatings. Corrosion Engineering Science and Technology. 42(4), pp. 285-286. 1478-422X.
• Mills, D. J. (2009) Application of electrochemical techniques to organic coatings (AETOC 2009). Corrosion Engineering, Science and Technology. 44(6), pp. 405-406. 1478-422X.
• Mills, D. J. (2008) Comparison of ENM, EIS and DC resistance for assessing and monitoring anti-corrosive coatings. Journal of Corrosion Science and Engineering. 8 1466-8858.
• Mills, D. J. (2007) Corrosion and health. Corrosion Management. 76, p. 8. 1355-5243.
• Mills, D. J. (2007) Corrosion in concrete. Corrosion Management. 78, p. 8. 1355-5243.
• Mills, D. J. (2007) Corrosion in the nuclear power industry. Corrosion Management. 77, p. 5. 1355-5243.
• Mills, D. J. (2007) Electrochemical measurements: are they any use? Corrosion Management. 75, p. 6. 1355-5243.
• Mills, D. J. (2008) EuroCorr 2008: managing corrosion for sustainability - part 1. Corrosion Engineering, Science and Technology. 43(4), pp. 273-280. 1478-422X.
• Mills, D. J. (2009) EuroCorr 2008: managing corrosion for sustainability - part 3. Corrosion Engineering, Science and Technology. 44(2), pp. 81-87. 1478-422X.
• Mills, D. J. (2009) EuroCorr 2008: managing corrosion for sustainability - part 4. Corrosion Engineering, Science and Technology. 44(4), pp. 241-246. 1478-422X.
• Mills, D. J. (2009) EuroCorr 2009: from the nanoscale to the plant. Corrosion Engineering, Science and Technology. 44(6), pp. 403-404. 1478-422X.
• Mills, D. J. (2007) Eurocorr 2006: “Reliability management of technical systems” - Part 1. Corrosion Engineering Science and Technology. 42(1), pp. 6-11. 1478-422X.
• Mills, D. J. (2007) Eurocorr 2006: “Reliability management of technical systems” - Part 2. Corrosion Engineering Science and Technology. 42(1), pp. 92-98. 1478-422X.
• Mills, D. J. (2007) Eurocorr 2006: “Reliability management of technical systems” - Part 3. Corrosion Engineering Science and Technology. 42(1), pp. 185-190. 1478-422X.
• Mills, D. J. (2007) Let it rust! Corrosion Management. 79, p. 8. 1355-5243.
• Mills, D. J., Broster, M. and Razaq, I. (2008) Continuing work to enable electrochemical methods to be used to monitor the performance of organic coatings in the field. Progress in Organic Coatings. 63(3), pp. 267-271. 0300-9440.
• Mills, D. J. and Hilbert, L. (2007) 14th Nordic Corrosion Congress. Corrosion Engineering Science and Technology. 42(4), pp. 283-284. 1478-422X.
• Mills, D. J., Mabbutt, S. J. and Bierwagen, G. (2003) Investigation into mechanism of protection of pigmented alkyd coatings using electrochemical and other methods. Progress in Organic Coatings. 46(3), pp. 176-181. 0300-9440.
• Mintz, B., Gunawardana, W. D. and Su, H. (2008) Al as solid solution hardener in steels. Materials Science and Technology. 24(5), pp. 596-600. 0267-0836.
• Mintz, B., Gunawardana, W. D. and Su, H. (2008) Influence of Al on strength and impact behaviour of hot rolled plain C-Mn steels. Materials Science and Technology. 24(5), pp. 601-606. 0267-0836.
• Nolle, L., Goodyear, A., Hopgood, A. A., Picton, P. and Braithwaite, N. S. J. (2002) Automated control of an actively compensated Langmuir probe system using simulated annealing. Knowledge-Based Systems. 15(5-6), pp. 349-354. 0950-7051.
• Nolle, L., Goodyear, A., Hopgood, A. A., Picton, P. and Braithwaite, N. S. J. (2005) Improved simulated annealing with step width adaptation for Langmuir probe tuning. Engineering Optimization. 37(5), pp. 463-477. 1029-0273.
• Ostachowicz, W. and Kaczmarczyk, S. (2001) Vibrations of composite plates with SMA fibres in a gas stream with defects of the type of delamination. Composite Structures. 54(2-3), pp. 305-311. 0263-8223.
• Picton, P. and Capp, M. (2008) Relaying scene information to the blind via sound using cartoon depth maps. Image and Vision Computing. 26(4), pp. 570-577. 0262-8856.
• Samamaliki-Simpson, R., Kaczmarczyk, S., Picton, P. and Turner, S. J. (2006) Non-linear modal interactions in a suspension rope system with time-varying length. Applied Mechanics and Materials. 5-6, pp. 217-224. 1660-9336.
• Woodcock, C. P., Mills, D. J. and Singh, H. T. (2008) Using novel electrochemical test methods to aid in the development of low volatile organic compound (VOC) coatings. Journal of Corrosion Science and Engineering. 8 1466-8858.
• Zaid, M., Gaydecki, P., Quek, S., Miller, G. and Fernandes, B. (2004) Extracting dimensional information from steel reinforcing bars in concrete using neural networks trained on data from an inductive sensor. NDT & E International. 37(7), pp. 551-558. 0963-8695.
• Zaid, M., Gaydecki, P., Quek, S., Miller, G. and Fernandes, B. (2002) Image reconstruction of steel reinforcing bars in concrete using Fourier-domain interpolation applied to a sparsely populated data set. Nondestructive Testing and Evaluation. 18(3-4), pp. 119-130. 1058-9759.
• Zhu, W. and Kaczmarczyk, S. (2009) Conference on the Mechanics of Slender Structures (MoSS2008). Elevator World. LVII(2), pp. 20-24. 0013-6158.

Monograph

• Chandrashekar, G. and Kaczmarczyk, S. (2007) Vibration testing of an elevator aramid suspension system. Report submitted to ThyssenKrupp Corporation, 30th June 2007 (Unpublished)
• Kaczmarczyk, S. (2009) Boulby Mine manshaft rope hoist dynamic analysis. (Submitted)
• Kaczmarczyk, S. (2007) Machine beam vibration analysis. Report submitted to ThyssenKrupp Corporation, 31 May 2007 (Unpublished)
• Kaczmarczyk, S. (2009) The prediction and analysis of the dynamic responses of compensating ropes in freedom tower elevator system. (Submitted)
• Kaczmarczyk, S. (2007) The prediction and analysis of the dynamic responses of compensating ropes in the Chicago Spire residential elevator system. Report submitted to ThyssenKrupp Corporation, 25 July 2007 (Unpublished)
• Kaczmarczyk, S. (2009) The prediction and analysis of the dynamic responses of governor ropes in freedom tower elevator system. (Submitted)
• Kaczmarczyk, S. and Chandrashekar, G. (2007) Turbo track analysis: resonance frequencies of the pallet assembly. Report submitted to ThyssenKrupp Corporation, 21 December 2007 (Unpublished)

Conference or Workshop Item

• Adams, J. P. and Turner, S. J. (2008) Problem solving and creativity for undergraduate computing and engineering students: the use of robots as a developmental tool. Seminar Presentation presented to: Creating Contemporary Student Learning Environments, University of Northampton, 14 May 2008. (Unpublished)
• Darowicki, K., Szocinski, M., Schaefer, K. and Mills, D. J. (2009) The influence of UV light on performance of poly(methyl methacrylate) in regard to dye-sensitised solar cells. Invited Presentation presented to: Fifth International Conference on Advances in Corrosion Protection by Organic Coatings, Cambridge, 14 - 18 September 2009. (Unpublished)
• Kaczmarczyk, S. (2007) The dynamics of material handling and lift systems. Lecture presented to: Istanbul Technical University, Istanbul, Turkey, 10 April 2007. (Unpublished)
• Kaczmarczyk, S. (2009) The non-stationary dynamics and vibrations of moving slender continua in vertical transportation systems. Seminar Presentation presented to: Engineering Research Seminar Series, Southampton, 17 November 2009. (Unpublished)
• Marais, J., Taylor, D. N., Denman, A. R., Phillips, C. A., Picton, P. and Monk, D. (2008) Automatic segmentation of the left ventricle for image registration in an emission based attenuation correction technique. Poster presented to: British Nuclear Medicine Society (BNMS) 36th Annual Meeting, Edinburgh, 12-14 May 2008. (Unpublished)
• Mills, D. J. (2008) Comparison of AC and DC methods for assessing organic coatings on steel. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 17 January 2008. (Unpublished)
• Mills, D. J. (2008) Use of electrochemical methods to monitor the performance of organic coatings in the field. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 17 January 2008. (Unpublished)
• Mills, D. J. (2009) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, June 2009. (Unpublished)
• Mills, D. J. (2009) Use of electrochemical noise method (ENM) to assess and monitor anti-corrosive organic coatings. Lecture presented to: 8th MULTIPROTECT Training Course on the Use of Electrochemical Techniques (part of 6th International Workshop on Application of Electrochemical Techniques to Organic Coatings (AETOC 2009)), Grado, Italy, 15 April 2009. (Unpublished)
• Mills, D. J. and Lyon, S. (2007) The industrial coatings applicator training scheme. Investigation to promote a link with WJA. Paper presented to: Water Jetting Association Annual Conference (WJA) , Lutterworth, Leicestershire, 18 May 2007. (Unpublished)
• Mills, D. J. and Schaefer, K. (2008) Investigation into influence of different surface preparation method on performance of anti – corrosive organic coatings on steel. Poster presented to: EUROCORR 2008: Managing Corrosion for Sustainability, Edinburgh, 7-11 September 2008. (Unpublished)
• Mills, D. J. and Schaefer, K. (2009) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Invited Presentation presented to: Sixth International Workshop on Application of Electrochemical Techniques to Organic Coatings (AETOC 2009), Grado, Italy, 15 - 18 April 2009. (Unpublished)
• Mills, D. J., Woodcock, C. P. and Jamali, S. (2009) Novel arrangements and data analysis methods to enable the electrochemical noise method to assess coatings more effectively. Paper presented to: European Corrosion Congress (EUROCORR) 2009, Nice, France, 6-10 September 2009. (Unpublished)
• Schaefer, K. and Mills, D. J. (2008) The influence of water jetting on subsequent performance of organic coatings on steel. Symposium presented to: University of Northampton Research Day, Northampton, 1 July 2008. (Unpublished)
• Turner, S. J., Hill, G. and Adams, J. P. (2009) Robots in problem solving in programming. Paper presented to: Higher Education Academy Subject Centre for Information and Computer Sciences 9th 1-day Teaching of Programming Workshop, Bath, 6 April 2009. (Unpublished)

Conference Proceedings

• Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2008) Problem solving and creativity in engineering: findings of interviews with experts and novices. In: UNSPECIFIED International Network for Engineering Education & Research (iNEER).
• Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2009) Problem solving and creativity in engineering: perceptions of novices and professionals. In: Ao, S. I., Douglas, C., Grundfest, W. S. and Burgstone, J. (eds.) Proceedings of the World Congress on Engineering and Computer Science 2009, Vol. 1. Hong Kong: Newswood Limited. 9789881701268.
• Adams, J. P. and Turner, S. J. (2008) Problem solving and creativity for undergraduate engineers: process or product? In: EE2008 - the International Conference on Innovation, Good Practice and Research in Engineering Education Conference Proceedings. Loughborough: Higher Education Academy. 9781904804659.
• Aierbe, X. A., Abete, J. M. and Kaczmarczyk, S. (2007) Distributed longitudinal vibration model of a lift system including the machine dynamics. In: Proceedings of the 2nd International Conference on Experiments/Process/System Modelling/Simulation & Optimization. Athens, Greece: University of Patras. 9605300907.
• Aierbe, X. A., Abete, J. M. and Kaczmarczyk, S. (2008) The simulation model of the vertical dynamics and control of an elevator system. In: Proceedings of the Symposium on the Mechanics of Slender Structure (MoSS 2008).
• Banerjee, J. R. and Su, H. (2008) A new method for free vibration of beams using theory of elasticity. In: AIAA Meeting Papers on Disc ; Vol. 13, No. 3 (Conference Proceedings series). American Institute of Aeronautics and Astronautics. 9781563479380.
• Banerjee, J. R., Su, H. and Gunawardana, W. D. (2008) Dynamic stiffness formulation and free vibration analysis of a moving timoshenko beam. In: AIAA Meeting Papers on Disc ; Vol 13, No. 3 (Conference Proceeding series). American Institute of Aeronautics and Astronautics. 9781563479380.
• Chandrashekar, G., Kaczmarczyk, S., Maguire, M. and Smith, S. (2007) Identification of the modal parameters of a composite aramid suspension system. In: Proceedings of the 3rd ECCOMAS Thematic Conference on Smart Structures and Materials. Gdansk, Poland: IFFM Publishers. 9788388237027. pp. 67-68.
• El-Madaani, F., Zaid, M., Gaydecki, P., Hussin, H. and Miller, G. (2006) Assessment of corrosion activity in reinforcing steel bars embedded within concrete using the inductive scanning technique. In: Thompson, D. O. and Chimenti, D. E. (eds.) Review of Progress in Quantitative Nondestructive Evaluation: Brunswick, Maine, 31 July - 5 August, 2005. Melville, New York: American Institute of Physics. 0735403120. pp. 1305-1312. (AIP conference proceedings; vol. 820)
• Emory, B., Zhu, W. and Kaczmarczyk, S. (2009) Modal testing and modeling of a simplified elevator system. In: Proceedings of the 27th Conference and Exposition on Structural Dynamics 2009 (IMAC XXVII). New York, USA: Curran Associates, Inc.. 9781605609614.
• Kaczmarczyk, S. (2008) The dynamic response of elevator compensating ropes in high-rise buildings. In: Proceedings of ELEVCON 2008. Elevator Technology. pp. 178-186.
• Kaczmarczyk, S., Iwankiewicz, R. and Terumichi, Y. (2008) Dynamic response of elevator compensating ropes in buildings under wind loading. In: Proceedings of the Symposium on the Mechanics of Slender Structure (MoSS 2008).
• Li, F., Al-Sherbaz, A., Jassim, S. and Adams, C. (2008) Credibility based secure route finding in wireless ad hoc networks. In: Agaian, S. S. and Jassim, S. (eds.) Mobile Multimedia/Image Processing, Security, and Applications 2008. Orlando, Florida, USA: Society of Photo Optical Instrumentation Engineers (SPIE). 9780819471734. [Proceedings of SPIE; Vol. 6982]
• Mills, D. J., Broster, M. and Rosaq, I. (2007) Continuing work to enable electrochemical methods to be used to monitor the performance of organic coatings in the field. In: Proceedings of Advances in Electrochemical Techniques to Examine Organic Coatings. Vigo, Spain: University of Vigo.
• Mills, D. J. and Donoghue, S. S. (2007) Investigation into environmental interaction of organic coatings using novel techniques. In: Proceedings of The European Corrosion Congress (Eurocorr 2007). Frankfurt am Main, Germany: Dechema.
• Mills, D. J. and Woodcock, C. P. (2008) Use of electrochemical noise method and electrochemical impedence spectroscopy for investigation of a set of organic coatings on steel. In: Proceedings of the EuroCorr 2008 - Managing Corrosion for Sustainability. Dechema.
• Taniuch, T., Terumichi, Y., Sogabe, K., Takehara, S. and Kaczmarczyk, S. (2008) Motion and control of a tethered system with fluid drag. In: Proceedings of the 4th Asian Conference on Multibody Dynamics.
• Terumichi, Y., Takehara, S., Kaczmarczyk, S. and Sogabe, K. (2009) Absolute nodal coordinate formulation for flexible bodies with time-varying length using multiple nonlinear time scales. In: Proceedings of the 1st African Conference on Computational Mechanics (AfriCOMP2009).
• Turner, S. J. and Adams, J. P. (2008) Robots and problem solving. In: 9th Annual Conference of the Subject Centre for Information and Computer Sciences. Newtownabbey: Higher Education Academy, Subject Centre for Information and Computer Sciences. 9780955967603. p. 16.
• Wang, Y., Picton, P., Turner, S. J. and Attenburrow, G. E. (2007) A neural network approach to investment the objective and subjective measurements of leather handle. In: Proceedings of the Symposium on Methods of Artificial Intelligence, AIMETH 2007. Poland: Silesian University of Technology. pp. 241-246.
• Wood, E., Kaczmarczyk, S., Stonnell, M. and Zaid, M. (2008) Conveying of granular material using a periodically forced oscillator with dry friction. In: Proceedings of the International Conference on Noise and Vibration Engineering (ISMA 2008). ISMA.
• Zaid, M., El-Madaani, F., Gaydecki, P. and Miller, G. (2006) Automatic corrosion classification and quantification of steel reinforcing bars within concrete using image data generated by an inductive sensor. In: Thompson, D. O. and Chimenti, D. E. (eds.) Review of Progress in Quantitative Nondestructive Evaluation: Brunswick, Maine, 31 July - 5 August, 2005. Melville, New York: American Institute of Physics. 0735403120. pp. 1313-1320. (AIP conference proceedings, vol. 820)

Patent

• Smith, R. and Kaczmarczyk, S. (2008) Actively damped tension member. USA. 16 May 2008. Patent number 60/938,305.
• Smith, R. and Kaczmarczyk, S. (2008) Method and apparatus to minimize compensation rope sway in elevators. USA. 15 September 2008. Patent number 60/972,495.
• Smith, R. and Kaczmarczyk, S. (2007) Method and apparatus to minimize compensation rope sway through tendon control in elevators. USA. 14 September 2007. Patent number 60/972,506.