Items where Division is "Faculties > Faculty of Arts, Science & Technology > Engineering"

A

• Abbas, R., Al-Sherbaz, A., Bennecer, A. and Picton, P. (2016) Development of scheduling process for the M2M communications system in smart cites. Panel Presentation presented to: School of Science and Technology Annual Research Conference, Newton Building, The University of Northampton, 02 March 2016. (Unpublished)
• Abbas, R., Al-Sherbaz, A., Bennecer, A. and Picton, P. (2016) Scheduling process for the M2M communications system in smart cites. Seminar Presentation presented to: The University of Northampton Graduate School Postgraduate Researcher (PGR) Conference 2016, Northampton, 14 June 2016.
• Abbas, R., Al-Sherbaz, A., Bennecer, A. and Picton, P. (2017) A new channel selection algorithm for the Weightless-N Frequency Hopping with lower collision probability. In: 8th International Network of the Future (NoF) Conference Proceedings :. London: IEEE. (In Press)
• Abbas, R., Al-Sherbaz, A., Bennecer, A. and Picton, P. (2017) A new channel selection algorithm for the Weightless-N Frequency Hopping with lower collision probability. In: 8th International Network of the Future (NoF) Conference Proceedings :. London: IEEE. (In Press)
• Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2009) Problem Solving and Creativity in Engineering: Perceptions of Novices and Professionals. In: Ao, S. I., Douglas, C., Grundfest, W. S. and Burgstone, J. (eds.) Proceedings of the World Congress on Engineering and Computer Science 2009 :. USA: Newswood Limited. pp. 618-623.
• Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2010) Problem solving and creativity in engineering: conclusions of a phenomenographic study of novices and professionals. Paper presented to: University of Northampton Learning and Teaching Conference: Learning Dialogues, University of Northampton, UK, 13 May 2010. (Unpublished)
• Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2010) Problem solving and creativity in engineering: conclusions of a three year PBL project involving reusable learning objects and robots. In: Proceedings of the International Conference on Engineering Education (ICEE 2010). 1562-3580.
• Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2010) Problem solving and creativity in engineering: conclusions of a three year project involving reusable learning objects and robots. Paper presented to: Engineering Education 2010 (EE 2010), Aston University, Birmingham, England, 06-08 July 2010. (Unpublished)
• Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2008) Problem solving and creativity in engineering: findings of interviews with experts and novices. In: UNSPECIFIED International Network for Engineering Education & Research (iNEER).
• Adams, J. P., Kaczmarczyk, S., Picton, P. and Demian, P. (2009) Problem solving and creativity in engineering: perceptions of novices and professionals. In: Ao, S. I., Douglas, C., Grundfest, W. S. and Burgstone, J. (eds.) Proceedings of the World Congress on Engineering and Computer Science 2009, Vol. 1. Hong Kong: Newswood Limited. 9789881701268.
• Adams, J. P. and Turner, S. J. (2008) Problem solving and creativity for undergraduate computing and engineering students: the use of robots as a developmental tool. Seminar Presentation presented to: Creating Contemporary Student Learning Environments, University of Northampton, 14 May 2008. (Unpublished)
• Adams, J. P. and Turner, S. J. (2008) Problem solving and creativity for undergraduate engineers: process or product? In: EE2008 - the International Conference on Innovation, Good Practice and Research in Engineering Education Conference Proceedings :. GBR: Higher Education Academy.
• Adams, J. P. and Turner, S. J. (2008) Problem solving and creativity for undergraduate engineers: process or product? In: EE2008 - the International Conference on Innovation, Good Practice and Research in Engineering Education Conference Proceedings. Loughborough: Higher Education Academy. 9781904804659.
• Aierbe, X. A., Abete, J. M. and Kaczmarczyk, S. (2007) Distributed longitudinal vibration model of a lift system including the machine dynamics. In: Proceedings of the 2nd International Conference on Experiments/Process/System Modelling/Simulation & Optimization. Athens, Greece: University of Patras. 9605300907.
• Aierbe, X. A., Abete, J. M. and Kaczmarczyk, S. (2008) The simulation model of the vertical dynamics and control of an elevator system. In: Proceedings of the Symposium on the Mechanics of Slender Structure (MoSS 2008).
• Ajah, S., Al-Sherbaz, A., Turner, S. J. and Picton, P. (2014) Sub 1GHz M2M communications standardization: The advancement in white space utilization for enhancing the energy efficiency. In: Merabti, M., Abuelma'atti, O. and Oliver, C. (eds.) PGNET Proceedings of the 15th Annual Postgraduate Symposium on the Convergence of Telecommunications, Networking and Broadcasting 2014 :. GBR: Liverpool John Moores University.
• Ajah, S., Al-Sherbaz, A., Turner, S. J. and Picton, P. (2014) Sub 1GHz M2M communications standardization: The advancement in white space utilization for enhancing the energy efficiency. In: Merabti, M., Abuelmaatti, O. and Oliver, C. (eds.) PGNET Proceedings of the 15th Annual Postgraduate Symposium on the Convergence of Telecommunications, Networking and Broadcasting 2014 :. Liverpool, UK: Liverpool John Moores University.
• Akid, R. and Mills, D. J. (2001) A comparison between conventional macroscopic and microscopic scanning electrochemical methods to evaluate galvanic corrosion. Corrosion Science. 43(7), pp. 1203-1216. 0010-938X.
• Al Qubeissi, M., Al-Esawi, N. and Sazhin, S. S. (2017) Droplets heating and evaporation: an application to diesel-biodiesel fuel mixtures. Proceedings ILASS–Europe 2017. 28th Conference on Liquid Atomization and Spray Systems.
• Al-Esawi, N. and Al Qubeissi, M. (2021) A new approach to formulation of complex fuel surrogates. Fuel. 283 0016-2361.
• Al-Esawi, N., Al Qubeissi, M., Whitaker, R. and Sazhin, S. S. (2019) Blended E85-diesel fuel droplet heating and evaporation. Energy Fuels. 33(3), 2477–2488. 0887-0624.
• Al-Gubury, H. and Bennecer, A. (2017) UV-Advanced Oxidation Process for Enhanced Bleaching of Waste Water Using composite ZnO-Co2O3. In: European Waste Water Management Conference. UK: European Waste Water Management Conference. (Accepted)
• Al-Jelawy, H. and Kaczmarczyk, S. (2018) Computational analysis of the fluid-structure interaction occurring in a model of two vehicles overtaking each other. Paper presented to: International Conference on Modern Practice in Stress and Vibration Analysis (MPSVA 2018), Clare College, Cambridge, UK, 02-04 July 2018.
• Al-Jelawy, H., Kaczmarczyk, S., Cross, M., Lewis, R., Singh, N. and Alkhafaji, D. (2018) Computational analysis of the fluid-structure interaction occurring in a model of two vehicles overtaking each other. Journal of Physics: Conference Series. 1106(1), pp. 1-19. 1742-6588.
• Al-Jelawy, H., Kaczmarczyk, S., Cross, M., Lewis, R., Singh, N. and Alkhafaji, D. (2018) Computational analysis of the fluid-structure interaction occurring in a model of two vehicles overtaking each other. Journal of Physics: Conference Series. 1106(1) 1742-6588.
• Al-Kuzee, J., Matsuura, T., Goodyear, A., Nolle, L., Hopgood, A. A., Picton, P. and Braithwaite, N. S. J. (2004) Optimization of plasma etch processes using evolutionary search methods with in-situ diagnostics. Plasma Sources Science and Technology. 13(4), pp. 612-622. 1361-6595.
• Al-Sherbaz, A., Jassim, S. and Adams, C. (2008) Convergence in wireless transmission technology promises best of both worlds. SPIE Newsroom. 31 October
• Al-Sherbaz, A., Jassim, S. and Adams, C. (2009) WiMAX-WiFi convergence with OFDM bridge. In: Agaian, S. S. and Jassim, S. (eds.) Mobile Multimedia/Image Processing, Security, and Applications 2009 :. Bellingham, Washington: Society of Photo Optical Instrumentation Engineers (SPIE).
• Al-Sherbaz, A., Jassim, S. and Adams, C. (2009) WiMAX-WiFi convergence with OFDM bridge. In: Agaian, S. S. and Jassim, S. (eds.) Mobile Multimedia/Image Processing, Security, and Applications 2009 :. Bellingham, Washington: Society of Photo Optical Instrumentation Engineers (SPIE).
• Andrew, J. P. and Kaczmarczyk, S. (2011) Systems Engineering of Elevators. Mobile, Alabama: Elevator World. 1886536953, 9781886536951.
• Angelo, J. D., Bennecer, A., Kaczmarczyk, S. and Picton, P. (2016) Modelling of thermal behaviour of iron oxide layers on boiler tubes. Journal of Physics: Conference Series. 721, pp. 1-8. 1742-6588.
• Angelo, J., Bennecer, A., Kaczmarczyk, S. and Picton, P. (2015) Modelling of the influence of iron oxide layers on microstructural damage of boiler tubes. Proceedings of the VIIIth International Workshop NDT in Progress. 2015, pp. 1-8. 1435-4934.
• Arrasate, X., Abete, J. M. and Kaczmarczyk, S. (2008) The simulation model of the vertical dynamics and control of an elevator system. In: Proceedings of the Symposium on the Mechanics of Slender Structure (MoSS 2008) :. pp. 1-5.
• Arrasate, X., Kaczmarczyk, S. and Abete, J. M. (2010) A simulation model of the vertical dynamics of an elevator system. In: Proceedings of the Symposium on the Mechanics of Slender Structure (MoSS 2010). 9788460811009.
• Azizsafaei, M., Sarwar, D., Fassam, L., Khandan, R. and Hosseinian Far, A. (2021) A Critical Overview of Food Supply Chain Risk Management. In: Cybersecurity, Privacy and Freedom Protection in the Connected World : Proceedings of the 13th International Conference on Global Security, Safety and Sustainability, London, January 2021. Springer. pp. 413-429.

B

• Banerjee, J. R., Sobey, A. J., Su, H. and Fitch, J. P. (2008) Use of computer algebra in Hamiltonian calculations. Advances in Engineering Software. 39(6), pp. 521-525. 0965-9978.
• Banerjee, J. R. and Su, H. (2008) A new method for free vibration of beams using theory of elasticity. In: AIAA Meeting Papers on Disc ; Vol. 13, No. 3 (Conference Proceedings series). American Institute of Aeronautics and Astronautics. 9781563479380.
• Banerjee, J. R., Su, H. and Gunawardana, W. D. (2008) Dynamic stiffness formulation and free vibration analysis of a moving timoshenko beam. In: AIAA Meeting Papers on Disc ; Vol 13, No. 3 (Conference Proceeding series). American Institute of Aeronautics and Astronautics. 9781563479380.
• Banerjee, J. R., Su, H. and Jayatunga, C. (2008) A dynamic stiffness element for free vibration analysis of composite beams and its application to aircraft wings. Computers & Structures. 86(6), pp. 573-579. 0045-7949.
• Becer, Z., Bennecer, A. and Sengouga, N. (2018) A multiple quantum well structure simulator. In: International Conference on Modelling & Simulation. USA: IEEE. (Accepted)
• Becer, Z., Bennecer, A. and Sengouga, N. (2019) Modeling Energy Bands in Type II Superlattices. Crystals. 9(12), pp. 1-22. 2073-4352.
• Behzadnasab, M., Mirabedini, S. M., Kabiri, K. and Jamali, S. (2011) Corrosion performance of epoxy coatings containing silane treated ZrO2 nanoparticles on mild steel in 3.5 % NaCl solution. Corrosion Science. 53(1), pp. 89-98. 0010-938X.
• Bennecer, A. (2018) Reliability of manual ultrasonic testing. Paper presented to: International Conference on Robotics, Automation and Non-Destructive Evaluation (RANE 2018), Chennai, India, 2018-06-20.
• Bennecer, A. (2018) Reliability of manual ultrasonic testing. Paper presented to: International Conference on Robotics, Automation and Non-Destructive Evaluation (RANE 2018), Chennai, India, 2018-06-20.
• Bennecer, A., Ingham, J. D., Williams, K. A., Penty, R. V., White, I. H., Ehlers, H., Hamacher, M. and Heidrich, H. (2008) Ultracompact microring laser-based optical-add multiplexer. Electronics Letters. 44(9), pp. 593-595. 0013-5194.
• Bennecer, A., McGuire, M., Flockhart, G. M. H., Pierce, S. G., Hayward, G. and Culshaw, B. (2010) Frequency response of underwater ultrasonic transducers in the near field using polarimetric polarization maintaining fiber sensors. In: Santos, J. L., Culshaw, B., Lopez-Higuera, J. M. and MacPherson, W. N. (eds.) Fourth European Workshop on Optical Fibre Sensors :. Bellingham, Washington: SPIE. pp. 1-4.
• Bennecer, A., McGuire, M., Flockhart, G. M. H., Pierce, S. G., Hayward, G. and Culshaw, B. (2010) Frequency response of underwater ultrasonic transducers in the near field using polarimetric polarization maintaining fiber sensors. In: Santos, J. L., Culshaw, B., Lopez-Higuera, J. M. and MacPherson, W. N. (eds.) Fourth European Workshop on Optical Fibre Sensors :. Bellingham, Washington: SPIE. pp. 1-4.
• Bennecer, A., Penty, R. V., White, I. H., Williams, K. A., Hamacher, M. and Heidrich, H. (2018) Monolithic Directly-Modulated Multi-Wavelength- Channel GaInAsP/InP Micro-Ring Laser Array. European Conference on Integrated Optics. , pp. 99-102.
• Bennecer, A., Williams, K. A., Penty, R. V., White, I. H., Hamacher, M. and Heidrich, H. (2008) Directly modulated wavelength-multiplexed integrated microring laser array. IEEE Photonics Technology Letters. 20(16), pp. 1411-1413. 1041-1135.

C

• Chandrashekar, G. and Kaczmarczyk, S. (2007) Vibration testing of an elevator aramid suspension system. Report submitted to ThyssenKrupp Corporation, 30th June 2007 (Unpublished)
• Chandrashekar, G., Kaczmarczyk, S., Maguire, M. and Smith, S. (2007) Identification of the modal parameters of a composite aramid suspension system. In: Proceedings of the 3rd ECCOMAS Thematic Conference on Smart Structures and Materials. Gdansk, Poland: IFFM Publishers. 9788388237027. pp. 67-68.
• Chong, Y. B., Bennecer, A., Hagglund, F., Siddiqi, S., Kappatos, V., Selcuk, C. and Gan, T.-H. (2015) A new synthetic training environment system based on an ICT-approach for manual ultrasonic testing. Measurement: Journal of the International Measurement Confederation. 71, pp. 11-22. 0263-2241.
• Colon, D., Cunha Jr, A., Kaczmarczyk, S. and Balthazar, J. (2017) On dynamic analysis and control of an elevator system using polynomial chaos and Karhunen-Loeve approaches. Procedia Engineering. 199, pp. 1629-1634. 1877-7058.
• Colon, D., Kaczmarczyk, S. and Balthazar, J. (2016) The application of a polynomial chaos approach to the vibration analysis of an elevator system. In: Rade, D. A. and Lima, A. M. G. (eds.) Proceedings of The 3rd International Symposium on Uncertainty Quantification and Stochastic Modeling. Maresias, Sao Paulo, Brazil: ABCM.
• Colon, D., Kaczmarczyk, S. and Balthazar, J. (2016) The application of a polynomial chaos approach to the vibration analysis of an elevator system. Paper presented to: 3rd International Symposium on Uncertainty Quantification and Stochastic Modeling, 2016-02-15 - 2016-02-19.
• Covington, A. D. (2011) Prediction in leather processing: a dark art or a clear possibility? Journal of the Society of Leather Technologists and Chemists. 95(6), pp. 231-242. 0144-0322.
• Covington, A. D. (2010) The mechanism of chrome tanning. Global Journal of Inorganic Chemistry. 1(2), pp. 119-131.
• Covington, A. D., Song, L., Suparno, O., Koon, H. E. C. and Collins, M. J. (2010) Link-lock: an explanation of the chemical stabilisation of collagen. World Leather. 23(5), pp. 35-43. 0894-3087.

D

• Darowicki, K., Szocinski, M., Schaefer, K. and Mills, D. J. (2011) Investigation of morphological and electrical properties of the PMMA coating upon exposure to UV irradiation based on AFM studies. Progress in Organic Coatings. 71(1), pp. 65-71. 0300-9440.
• Darowicki, K., Szocinski, M., Schaefer, K. and Mills, D. J. (2009) The influence of UV light on performance of poly(methyl methacrylate) in regard to dye-sensitised solar cells. Invited Presentation presented to: Fifth International Conference on Advances in Corrosion Protection by Organic Coatings, Cambridge, 14 - 18 September 2009. (Unpublished)
• Darowicki, K., Szocinski, M., Schaefer, K. and Mills, D. J. (2010) The influence of UV light on performance of poly(methyl methacrylate) in regard to dye-sensitised solar cells. ECS Transactions. 24(1), pp. 127-136. 1938-5862.
• Dickison, M., Ghaleeh, M., Milady, S., Wen, L. T. and Qubeissi, M. A. (2020) Investigation into the Aerodynamic Performance of a Concept Sports Car. Journal of Applied Fluid Mechanics. 13(2), pp. 583-601. 1735-3572.
• Dravid, R. and Duncan, A. (2011) Engineering soft skills development to avoid hard knocks. In: 2011 IEEE Global Engineering Education Conference. New Jersey, USA: IEEE. 9781612846439. pp. 354-357.
• Duaka, U. P., Bennecer, A. and Picton, P. (2018) Reliability of remote field testing in detecting defects on steam boiler tubes. Invited Presentation presented to: International Conference on Robotics, Automation and Non-Destructive Evaluation, Chennai, India, 19-20 June 2018. Chennai, India: Scopus. (Accepted)
• Duncan, A. and Dravid, R. (2010) Soft skills for scientists: not a soft option: using self-questioning and peer dialogue to support professional and transferable skills development. Paper presented to: University of Northampton Learning and Teaching Conference: Learning Dialogues, University of Northampton, UK, 13 May 2010. (Unpublished)

E

• Ehrl, T., Adams, J. P., Kaczmarczyk, S. and Meier, B. (2017) Improvement of the learning environment at an international multicultural company through the assessment of relevant methodology and technology goals. Lift and Escalator Symposium. 7, 5/1-5/12. 2052-7225.
• Ehrl, T., Smith, R. and Kaczmarczyk, S. (2017) Key Dynamic Parameters that Influence Ride Quality of Passenger Transportation Systems. Transportation Systems in Buildings. 1(1), pp. 1-10. 2631-8156.
• El-Madaani, F., Zaid, M., Gaydecki, P., Hussin, H. and Miller, G. (2006) Assessment of corrosion activity in reinforcing steel bars embedded within concrete using the inductive scanning technique. In: Thompson, D. O. and Chimenti, D. E. (eds.) Review of Progress in Quantitative Nondestructive Evaluation: Brunswick, Maine, 31 July - 5 August, 2005. Melville, New York: American Institute of Physics. 0735403120. pp. 1305-1312. (AIP conference proceedings; vol. 820)
• Emory, B., Zhu, W. and Kaczmarczyk, S. (2009) Modal testing and modeling of a simplified elevator system. In: Proceedings of the 27th Conference and Exposition on Structural Dynamics 2009 (IMAC XXVII). New York, USA: Curran Associates, Inc.. 9781605609614.

F

• Francis, J., Bennecer, A. and Picton, P. (2018) North Sea oil platform corrosion under insulation survey. Invited Presentation presented to: International Conference on Robotics, Automation and Non-Destructive Evaluation, Chennai, India, 19-20 June 2018. Chennai, India: Scopus. (Accepted)

G

• García-Atance Fatjó, G., Torres Pérez, A. and Hadfield, M. (2011) Experimental study and analytical model of the cavitation ring region with small diameter ultrasonic horn. Ultrasonics Sonochemistry. 18(1), pp. 73-79. 1350-4177.
• Gaydecki, P., Fernandes, B., Quek, S., Benitez, D., Miller, G. and Zaid, M. (2007) Inductive and magnetic field inspection systems for rebar visualization and corrosion estimation in reinforced and pre-stressed concrete. Non Destructive Testing Evaluation. 22(4), pp. 255-298. 1058-9759.
• Gaydecki, P., Miller, G., Zaid, M., Fernandes, B. and Hussin, H. (2008) Detection of magnetic fields highly attenuated by the skin effect through a ferrous steel boundary using a super narrow-band digital filter. IEEE Transactions on Instrumentation and Measurement. 57(6), pp. 1171-1176. 0018-9456.
• Ghaleeh, M., Baroutaji, A. and Qubeissi, M. A. Microstructure, Isothermal and Thermomechanical Fatigue Behaviour of Leaded and Lead-free Solder Joints. Engineering Failure Analysis. 117, p. 104846. 1350-6307.
• Ghaleeh, M., Kaczmarczyk, S., Rasool, S., Adams, J. and Al-Esawi, N. (2020) Computer-Aided Structural Analysis of the Lift Car – Frame System Under Emergency Arrest Operational Conditions. Paper presented to: . (In Press)

H

• Hassan, A., Torres Perez, A., Kaczmarczyk, S. and Picton, P. (2016) The effect of time delay on control stability of an electromagnetic active tuned mass damper for vibration control. Paper presented to: 5th Symposium on the Mechanics of Slender Structures (MoSS2015)), The University of Northampton, 2015-09-21 - 2015-09-22.
• Hassan, A., Torres-Perez, A., Kaczmarczyk, S. and Picton, P. (2016) Vibration control of a Stirling engine with an electromagnetic active tuned mass damper. Control Engineering Practice. 51, pp. 108-120. 0967-0661.
• Herrera, I. and Kaczmarczyk, S. (2018) 7th Symposium on Mechanics of Slender Structures 2017 (MoSS2017). Journal of Physics: Conference Series. 1048(011001), pp. 1-3. 1742-6596.
• Herrera, I. and Kaczmarczyk, S. (2018) 7th Symposium on Mechanics of Slender Structures 2017 (MoSS2017). Journal of Physics: Conference Series. 1048(11001), pp. 1-3. 1742-6596.
• Herrera, I. and Kaczmarczyk, S. (2016) Simple models for rope substructure mechanics: Application to electro-mechanical lifts. Paper presented to: 5th Symposium on the Mechanics of Slender Structures (MoSS2015)), The University of Northampton, 2015-09-21 - 2015-09-22.
• Herrera, I. and Kaczmarczyk, S. (2009) The assessment of vibration absorption capacity of elevator's passengers. Journal of Physics: Conference Series. 181, 012081. 1742-6588.
• Herrera, I., Su, H. and Kaczmarczyk, S. (2014) Influence of the load occupancy ratio on the dynamic response of an elevator car system. Applied Mechanics and Materials. 706, pp. 128-136. 1662-7482.
• Herrera, I., Su, H. and Kaczmarczyk, S. (2010) Investigation into the damping and stiffness characteristics of an elevator car system. Applied Mechanics and Materials. 24-25, pp. 77-82. 1660-9336.
• Herrera, I., Su, H. and Kaczmarczyk, S. (2014) Modeling and estimation of damping and stiffness characteristics of lift passengers. In: Sivasundaram, S. (ed.) 10th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences: ICNPAA 2014. Melville, NY: AIP Publishing LLC. 9780735412767. pp. 395-402.
• Herrera, I., Su, H. and Kaczmarczyk, S. (2014) Modelling and estimation of the damping and stiffness characteristics of lift passengers. Paper presented to: ICNPAA 2014 World Congress: 10th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences, Narvik University, Norway, 15-18 July 2014. (Unpublished)

J

• Jamali, S. and Mills, D. J. (2010) Novel set-up for application of electrochemical noise measurement (ENM) on protective coatings. Paper presented to: 2nd International Conference Corrosion and Material Protection, Prague, Czech Republic, 19-22 April 2010. (Unpublished)
• Jamali, S., Mills, D. J., Mabbutt, S. J. and Picton, P. (2011) Effect of surface preparation on the protective efficiency and adhesion of organic coatings applied to steel. In: EUROCORR 2011: Developing Solutions for the Global Challenge. Stockholm, Sweden: Dechema.
• Jamali, S., Mills, D. J., Mabbutt, S. J. and Picton, P. (2011) Effect of surface preparation on the protective efficiency and adhesion of organic coatings applied to steel. In: EUROCORR 2011: Developing Solutions for the Global Challenge :. SWE: Dechema. pp. 1-9.
• Jamali, S., Mills, D. J. and Woodcock, C. P. (2010) Ways of increasing the effectiveness of the electrochemical noise method for assessment of organic coatings on metal. ECS Transactions. 24(1), pp. 115-125. 1938-5862.
• Jamali, S., Mills, D. J. and Woodcock, C. P. (2010) Ways of increasing the effectiveness of the electrochemical noise method for assessment of organic coatings on metal. ECS Transactions. 24(1), pp. 115-125. 1938-5862.
• Jamali, S. S. and Mills, D. J. (2016) A critical review of electrochemical noise measurement as a tool for evaluation of organic coatings. Progress in Organic Coatings. 95, pp. 26-37. 0300-9440.
• Jamali, S. S. and Mills, D. J. (2016) A critical review of electrochemical noise measurement as a tool for evaluation of organic coatings. Progress in Organic Coatings. 95 0300-9440.
• Jamali, S. S., Mills, D. J., Cottis, R. A. and Lan, T. Y. (2016) Analysis of electrochemical noise measurement on an organically coated metal. Progress in Organic Coatings. 96, pp. 52-57. 0300-9440.
• Jamali, S. S., Mills, D. J., Cottis, R. A. and Lan, T. Y. (2016) Analysis of electrochemical noise measurement on an organically coated metal. Progress in Organic Coatings. 96 0300-9440.
• Jamali, S. S., Mokhtarian, P. and Mills, D. J. (2015) A probabilistic model for estimation of ionically permeable inhomogeneities in polymer coatings. Progress in Organic Coatings. 87 0300-9440.
• Jamali, S. S., Mokhtarian, P. and Mills, D. J. (2015) A probabilistic model for estimation of ionically permeable inhomogeneities in polymer coatings. Progress in Organic Coatings. 87 0300-9440.
• Jamali, S. S., Mills, D. J. and Sykes, J. M. (2014) Measuring electrochemical noise of a single working electrode for assessing corrosion resistance of polymer coated metals. Progress in Organic Coatings. 77(3), pp. 733-741. 0300-9440.
• Jamali, S. S., Suesse, T., Jamali, S., Mills, D. J. and Zhao, Y. (2017) Mechanism of ionic conduction in multi-layer polymeric films studied via electrochemical measurement and theoretical modelling. Progress in Organic Coatings. 108, pp. 68-74. 0300-9440.

K

• Kabeer, S., Attenburrow, G. E., Picton, P. and Wilson, M. (2013) Development of an image analysis technique for measurement of Poisson’s ratio for viscoelastic materials: application to leather. Journal of Materials Science. 48(2), pp. 744-749. 0022-2461.
• Kaczmarczyk, S. (2009) Boulby Mine manshaft rope hoist dynamic analysis. (Submitted)
• Kaczmarczyk, S. (2010) Conference on the Mechanics of Slender Structures (MoSS 2010). Elevator World. LVIII(2), pp. 20-24. 0013-6158.
• Kaczmarczyk, S. (2020) The Dynamic Interactions and Control of Long Slender Continua and Discrete Inertial Components in Vertical Transportation Systems. In: Abramyan, A., Andrianov, I. and Gaiko, V. (eds.) Nonlinear Dynamics of Discrete and Continuous Systems :. Switzerland: Springer International.
• Kaczmarczyk, S. (2014) Elevator technology: an introduction to elevator system engineering. Invited Keynote presented to: VIII Mechanical and Industrial Engineering Rio Grande do Sul Seminar – SEEMI and VI Materials and Industrial Processes Seminar, Feevale University, Novo Hamburgo, Brazil, 04-07 November 2014. (Unpublished)
• Kaczmarczyk, S. (2014) From deep underground to high-rise elevation: a ‘vertical journey’ in applied dynamics. Invited Presentation presented to: Seminar, Universidade Feevale, Brazil, 21 March 2014. (Unpublished)
• Kaczmarczyk, S. (2016) Going the “distance”: evolution of the Lift Engineering program at UoN. Elevator World. December(2016) 0013-6158.
• Kaczmarczyk, S. (2007) Inaugural Lift Engineering School. Elevatori. 36(1), pp. 32-35. 1121-7995.
• Kaczmarczyk, S. (2017) Lift guide rail – counterweight/car - suspension systems under seismic excitations: the dynamic behaviour and protection measures. Lift and Escalator Symposium. 7 2052-7225.
• Kaczmarczyk, S. (2017) Lift guide rail – counterweight/car - suspension systems under seismic excitations: the dynamic behaviour and protection measures. Lift and Escalator Symposium. 7 2052-7225.
• Kaczmarczyk, S. (2016) Lift industry training and academic education workshop: academic qualifications. Workshop presented to: 6th Symposium on Lift and Escalator Technologies, Northampton, 21-22 September 2016.
• Kaczmarczyk, S. (2007) Machine beam vibration analysis. Report submitted to ThyssenKrupp Corporation, 31 May 2007 (Unpublished)
• Kaczmarczyk, S. (2014) Modelling and numerical simulation of vertical transportation systems. Paper presented to: ICNPAA 2014 World Congress: 10th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences, Narvik University, Norway, 15-18 July 2014. (Unpublished)
• Kaczmarczyk, S. (2011) Nonlinear sway and active stiffness control of long moving ropes in high-rise vertical transportation systems. In: Náprstek, J., Horáček, J., Okrouhlík, M., Marvalová, B., Verhulst, F. and Sawicki, J. T. (eds.) Vibration Problems ICOVP 2011: The 10th International Conference on Vibration Problems. Dordrecht; Heidelberg; London; New York: Springer. 9789400720688 print, 9789400720695 online. pp. 183-188. [Springer Proceedings in Physics; 139]
• Kaczmarczyk, S. (2005) Prediction of the influence of vibration on structural integrity of elevator suspension ropes. Key Engineering Materials. 293-294, pp. 761-768. 1013-9826.
• Kaczmarczyk, S. (2017) Suspension systems under seismic excitations. Invited Presentation presented to: CIBSE Lifts Group Annual Seminar 2017, London, 01 November 2017.
• Kaczmarczyk, S. (2010) The development of a new advanced passenger / goods lift system (feasibility study for ACE Lifts Ltd). (Unpublished)
• Kaczmarczyk, S. (2017) The dynamic behaviour of lift ropes and components under seismic excitation. Invited Presentation presented to: E2 Forum Lab 2017, Milan, Italy, 27 June 2017.
• Kaczmarczyk, S. (2018) The dynamic interactions in high-rise vertical transportation systems. Symposium on Lift & Escalator Technologies. 8, pp. 151-158. 2052-7225.
• Kaczmarczyk, S. (2008) The dynamic response of elevator compensating ropes in high-rise buildings. In: Proceedings of ELEVCON 2008. Elevator Technology. pp. 178-186.
• Kaczmarczyk, S. (2007) The dynamics of material handling and lift systems. Lecture presented to: Istanbul Technical University, Istanbul, Turkey, 10 April 2007. (Unpublished)
• Kaczmarczyk, S. (2013) The dynamics of vertical transportation systems. Invited Presentation presented to: Seminar, Delft University of Technology, The Netherlands, 11 December 2013. (Unpublished)
• Kaczmarczyk, S. (2017) The dynamics of vertical transportation systems in deep underground and high-rise applications. Invited Presentation presented to: Engineering Research Seminar Series, University of Kwazulu-Natal, Durban, South Africa, 22 August 2017.
• Kaczmarczyk, S. (2017) The modelling and prediction of dynamic responses of slender continua deployed in tall structures under long period seismic excitations. Symposium presented to: Symposium on Mechanics of Slender Structures (MoSS) 2017, Merida, Spain, 14-15 December 2017.
• Kaczmarczyk, S. (2018) The modelling and prediction of dynamic responses of slender continua deployed in tall structures under long-period seismic excitations. Journal of Physics: Conference Series. 1048(012005), pp. 1-10. 1742-6588.
• Kaczmarczyk, S. (2009) The non-stationary dynamics and vibrations of moving slender continua in vertical transportation systems. Seminar Presentation presented to: Engineering Research Seminar Series, Southampton, 17 November 2009. (Unpublished)
• Kaczmarczyk, S. (2014) The prediction and analysis of dynamic behaviour and vibrations of lift systems. Invited Presentation presented to: 6th European Lift Congress Heilbronn 2014, Stuttgart, Germany, 07-08 October 2014. (Unpublished)
• Kaczmarczyk, S. (2009) The prediction and analysis of the dynamic responses of compensating ropes in freedom tower elevator system. (Submitted)
• Kaczmarczyk, S. (2007) The prediction and analysis of the dynamic responses of compensating ropes in the Chicago Spire residential elevator system. Report submitted to ThyssenKrupp Corporation, 25 July 2007 (Unpublished)
• Kaczmarczyk, S. (2009) The prediction and analysis of the dynamic responses of governor ropes in freedom tower elevator system. (Submitted)
• Kaczmarczyk, S. (2018) The prediction and control of dynamic interactions between tall buildings and high-rise vertical transportation systems subject to seismic excitations. In: Proceedings of the 25th International Congress on Sound and Vibration. Gliwice, Poland: Silesian University of Technology Press.
• Kaczmarczyk, S. (2018) The prediction and control of dynamic interactions between tall buildings and high-rise vertical transportation systems subject to seismic excitations. Paper presented to: 25th International Congress on Sound and Vibration (ICSV 25), Hiroshima, Japan, 08-12 July 2018.
• Kaczmarczyk, S. (2014) Vibration problems and quality of ride in elevator systems. Workshop presented to: VIII Mechanical and Industrial Engineering Rio Grande do Sul Seminar – SEEMI and VI Materials and Industrial Processes Seminar, Feevale University, Novo Hamburgo, Brazil, 04-07 November 2014. (Unpublished)
• Kaczmarczyk, S. (2018) The modelling and prediction of dynamic responses of slender continua deployed in tall structures under long-period seismic excitations. Journal of Physics: Conference Series. 1048(12005), pp. 1-11. 1742-6588.
• Kaczmarczyk, S. (2012) The nonstationary, nonlinear dynamic interactions in slender continua deployed in high-rise vertical transportation systems in the modern built environment. Journal of Physics: Conference Series. 382(1) 1742-6588.
• Kaczmarczyk, S. (2012) The nonstationary, nonlinear dynamic interactions in slender continua deployed in high-rise vertical transportation systems in the modern built environment. Journal of Physics: Conference Series. 382(1) 1742-6588.
• Kaczmarczyk, S. and Chandrashekar, G. (2007) Turbo track analysis: resonance frequencies of the pallet assembly. Report submitted to ThyssenKrupp Corporation, 21 December 2007 (Unpublished)
• Kaczmarczyk, S., Iwankiewicz, R. and Terumichi, Y. (2008) Dynamic response of elevator compensating ropes in buildings under wind loading. In: Proceedings of the Symposium on the Mechanics of Slender Structure (MoSS 2008).
• Kaczmarczyk, S., Iwankiewicz, R. and Terumichi, Y. (2009) The dynamic behaviour of a non-stationary elevator compensating rope system under harmonic and stochastic excitations. Journal of Physics: Conference Series. 181, 012047. 1742-6588.
• Kaczmarczyk, S. and Iwankiewicz, R. (2017) Gaussian and non-Gaussian stochastic response of slender continua with time-varying length deployed in tall structures. International Journal of Mechanical Sciences. 134, pp. 500-510. 0020-7403.
• Kaczmarczyk, S. and Iwankiewicz, R. (2017) Gaussian and non-Gaussian stochastic response of slender continua with time-varying length deployed in tall structures. International Journal of Mechanical Sciences. 134 0020-7403.
• Kaczmarczyk, S. and Iwankiewicz, R. (2017) Nonlinear vibrations of a cable system with a tuned mass damper under deterministic and stochastic base excitation. Procedia Engineering. 199, pp. 675-680. 1877-7058.
• Kaczmarczyk, S. and Iwankiewicz, R. (2017) Nonlinear vibrations of a cable system with a tuned mass damper under deterministic and stochastic base excitation. Procedia Engineering. 199, pp. 675-680. 1877-7058.
• Kaczmarczyk, S. and Iwankiewicz, R. (2017) On the nonlinear deterministic and stochastic dynamics of a cable - mass system with time-varying length. In: Bucher, C., Ellingwood, B. and Frangopol, D. (eds.) Proceedings of 12th International Conference on Structural Safety & Reliability. Vienna: TU-Verlag.
• Kaczmarczyk, S., Iwankiewicz, R. and Terumichi, Y. (2010) The responses of long moving vertical ropes and cables subjected to dynamic loading due to the host structure sway. In: Proceedings of the Symposium on the Mechanics of Slender Structure (MoSS 2010). San Sebastian, Spain: University of Mondragon. 9788460811009. pp. 1-10.
• Kaczmarczyk, S., Iwankiewicz, R. and Terumichi, Y. (2010) The responses of long moving vertical ropes and cables subjected to dynamic loading due to the host structure sway. In: Proceedings of the Symposium on the Mechanics of Slender Structure (MoSS 2010) :. ESP: University of Mondragon. pp. 1-10.
• Kaczmarczyk, S. and Mirhadizadeh, S. (2014) Computer simulation model of a lift car assembly with an active tuned mass damper. In: Kaczmarczyk, S. and Peters, R. (eds.) Symposium on Lift and Escalator Technologies: Volume 4. Northampton, UK: The University of Northampton, CIBSE Lifts Group. 2052-7225. pp. 99-104.
• Kaczmarczyk, S. and Mirhadizadeh, S. (2014) Computer simulation model of a lift car assembly with an active tuned mass damper. Symposium on Lift & Escalator Technologies. 4, pp. 99-104. 2052-7225.
• Kaczmarczyk, S. and Mirhadizadeh, S. (2014) Modelling, simulation and experimental validation of nonlinear dynamic interactions in an aramid rope system. Applied Mechanics and Materials. 706, pp. 117-127. 1662-7482.
• Kaczmarczyk, S., Mirhadizadeh, S., Picton, P., Salamaliki-Simpson, R. and Turner, S. J. (2013) Modelling, simulation and experimental validation of nonlinear dynamic interactions in an aramid rope system. In: Dimitrovová, Z. (ed.) 11th Biennial International Conference on Vibration Problems (ICOVP-2013) Conference Proceedings. ICOVP.
• Kaczmarczyk, S., Mirhadizadeh, S., Picton, P., Salamaliki-Simpson, R. and Turner, S. J. (2013) Modelling, simulation and experimental validation of nonlinear dynamic interactions in an aramid rope system. Paper presented to: 11th Biennial International Conference on Vibration Problems (ICOVP) 2013, 2013-09-09 - 2013-09-12.
• Kaczmarczyk, S. and Ostachowicz, W. (2003) Transient vibration phenomena in deep mine hoisting cables. Part 2: Numerical simulation of the dynamic response. Journal of Sound and Vibration. 262(2), pp. 245-289. 1095-8568.
• Kaczmarczyk, S. and Picton, P. (2013) The prediction of nonlinear responses and active stiffness control of moving slender continua subjected to dynamic loadings in a vertical host structure. International Journal of Acoustics and Vibration. 18(1), pp. 39-44. 1027-5851.
• Kaczmarczyk, S. and Picton, P. (2011) The prediction of nonlinear responses and active stiffness control of moving slender continua subjected to dynamic loadings in a vertical host structure. In: Crocker, M. J., Ivanov, N. and Pawelczyk, M. (eds.) Proceedings of the 18th International Congress on Sound and Vibration. Rio de Jainero, Brazil: Curran Associates Inc. 9781618392596. pp. 2767-2774.
• Kaczmarczyk, S. and Smith, R. (2017) MSc Lift Engineering at The University of Northampton: systems engineering approach bridging the gap between the theory and industrial practice. Workshop presented to: 7th Symposium on Lift and Escalator Technologies, Highgate House, Creaton, Northampton, 20-21 September 2017. (Unpublished)
• Kaczmarczyk, S., Smith, R. and Mellor, N. (2018) Systems engineering approach: postgraduate programme bridging the gap between the theory and industrial practice in lift (elevator) engineering. Symposium on Lift & Escalator Technologies. 8, pp. 141-158. 2052-7225.
• Kawaguti, K., Terumichi, Y., Takehara, S., Kaczmarczyk, S. and Sogabe, K. (2007) The study of the tether motion with time-varying length using the absolute nodal coordinate formulation with multiple nonlinear time scales. Journal of System Design and Dynamics. 1(3), pp. 491-500. 1881-3046.
• Kazemian, H., Remy, G. and Picton, P. (2010) Supervised neural fuzzy schemes in video transmission over bluetooth. In: Diamantaras, K., Duch, W. and Iliadis, L. S. (eds.) Artificial Neural Networks - ICANN 2010 (Lecture Notes in Computer Science; Vol. 6354). Springer-Verlag. 9783642158257. pp. 378-386.
• Kendig, M. and Mills, D. J. (2016) An historical perspective on the corrosion protection by paints. Progress in Organic Coatings. 102(Part A) 0300-9440.
• Kendig, M. and Mills, D. J. (2016) An historical perspective on the corrosion protection by paints. Progress in Organic Coatings. 102(Part A) 0300-9440.
• Koon, H. E. C., Loreille, O. M., Covington, A. D., Christensen, A. F., Parsons, T. J. and Collins, M. J. (2008) Diagnosing post-mortem treatments which inhibit DNA amplification from US MIAs buried at the Punchbowl. Forensic Science International. 178(2-3), pp. 171-177. 0379-0738.
• Kwiatkowski, R., Kaczmarczyk, S., Salter, C. and Mulhern, L. (2014) The development of a low to mid-rise energy efficient, green lift system. In: Kaczmarczyk, S. and Peters, R. (eds.) Symposium on Lift and Escalator Technologies: Volume 4. Northampton, UK: The University of Northampton, CIBSE Lifts Group. 2052-7225. pp. 127-132.

L

• Li, F., Al-Sherbaz, A., Jassim, S. and Adams, C. (2008) Credibility based secure route finding in wireless ad hoc networks. In: Agaian, S. S. and Jassim, S. (eds.) Mobile Multimedia/Image Processing, Security, and Applications 2008. Orlando, Florida, USA: Society of Photo Optical Instrumentation Engineers (SPIE). 9780819471734. [Proceedings of SPIE; Vol. 6982]
• Lyon, S. B., Bingham, R. and Mills, D. J. (2017) Advances in corrosion protection by organic coatings: what we know and what we would like to know. Progress in Organic Coatings. 102(Part A), pp. 2-7. 0300-9440.
• Lyon, S. B., Bingham, R. and Mills, D. J. (2016) Advances in corrosion protection by organic coatings: what we know and what we would like to know. Progress in Organic Coatings. 102(Part A) 0300-9440.

M

• Mabbutt, S. J., Bierwagen, G. and Mills, D. J. (2002) New experimental arrangement for the acquisition of electrochemical noise data from high resistance organic anti-corrosive coatings. Anti-Corrosion Methods and Materials. 49(4), pp. 264-269. 0003-5599.
• Mabbutt, S. J. and Mills, D. J. (2001) Recent UK work investigating anti-corrosive organic coatings using the electrochemical noise method (ENM). Surface Coatings International, Part B: Coatings Transactions. 84(4), pp. 277-283. 1742-0261.
• Mabbutt, S. J., Mills, D. J. and Woodcock, C. P. (2007) Developments of the electrochemical noise method (ENM) for more practical assessment of anti-corrosion coatings. Progress in Organic Coatings. 59(3), pp. 192-196. 0300-9440.
• Mabbutt, S. J., Picton, P., Shaw, P. and Black, S. (2012) Review of Artificial Neural Networks (ANN) applied to corrosion monitoring. Journal of Physics: Conference Series. 364(1), 012114. 1742-6596.
• Maguire, M., Kaczmarczyk, S., Adams, J. P. and Smith, R. (2007) Modal parameters of a lift suspension system. Elevatori. 36(6), pp. 68-75. 1121-7995.
• Mapletoft, D. P., Bennecer, A. and Picton, P. (2018) Production of a suitable RT(CR) procedure to ensure the ASTM E2445-14 standard is met. Invited Presentation presented to: International Conference on Robotics, Automation and Non-Destructive Evaluation, Chennai, India, 19-20 June 2018. Chennai, India: Scopus. (Accepted)
• Marais, J., Taylor, D. N., Denman, A. R., Phillips, C. A., Picton, P. and Monk, D. (2008) Automatic segmentation of the left ventricle for image registration in an emission based attenuation correction technique. Poster presented to: British Nuclear Medicine Society (BNMS) 36th Annual Meeting, Edinburgh, 12-14 May 2008. (Unpublished)
• Meng, X., Lu, M., Yin, W., Bennecer, A. and Kirk, K. (2021) Evaluation of coating thickness using lift-off insensitivity of eddy current sensor. Sensors (Switzerland). 21(2) 1424-8220.
• Mills, D. J. (2010) Member of Editorial Board. Corrosion Engineering, Science and Technology. Leeds: Maney Publishing. 1478-422X.
• Mills, D. J. (2009) EuroCorr 2008: managing corrosion for sustainability - part 2. Corrosion Engineering, Science and Technology. 44(1), pp. 2-7. 1478-422X.
• Mills, D. J. (2010) Advances in Corrosion Protection by Organic Coatings: Christ's College, Cambridge 13th-17th September 2009: conference report. Corrosion Management. 98, p. 8. 1355-5243.
• Mills, D. J. (2010) Anodic protection. Corrosion Management. 95 1355-5243.
• Mills, D. J. (2007) Application of electrochemical techniques to organic coatings. Corrosion Engineering Science and Technology. 42(4), pp. 285-286. 1478-422X.
• Mills, D. J. (2009) Application of electrochemical techniques to organic coatings (AETOC 2009). Corrosion Engineering, Science and Technology. 44(6), pp. 405-406. 1478-422X.
• Mills, D. J. (2008) Comparison of AC and DC methods for assessing organic coatings on steel. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 17 January 2008. (Unpublished)
• Mills, D. J. (2008) Comparison of ENM, EIS and DC resistance for assessing and monitoring anti-corrosive coatings. Journal of Corrosion Science and Engineering. 8 1466-8858.
• Mills, D. J. (2007) Corrosion and health. Corrosion Management. 76, p. 8. 1355-5243.
• Mills, D. J. (2007) Corrosion in concrete. Corrosion Management. 78, p. 8. 1355-5243.
• Mills, D. J. (2007) Corrosion in the nuclear power industry. Corrosion Management. 77, p. 5. 1355-5243.
• Mills, D. J. (2010) Dealing with technical enquiries. Corrosion Management. 98, p. 7. 1355-5243.
• Mills, D. J. (2011) Developments in electrochemical measurements in order to assess anti-corrosive coatings more effectively. Paper presented to: Advances in Electrochemical Techniques for Assessment of Organic Coatings, Belgium, May 2011. (Unpublished)
• Mills, D. J. (2010) Dissemination of corrosion information. Corrosion Management. 97 1355-5243.
• Mills, D. J. (2010) Effect of different surface preparations on the corrosion behaviour of mild steel. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 10 December 2010. (Unpublished)
• Mills, D. J. (2007) Electrochemical measurements: are they any use? Corrosion Management. 75, p. 6. 1355-5243.
• Mills, D. J. (2008) EuroCorr 2008: managing corrosion for sustainability - part 1. Corrosion Engineering, Science and Technology. 43(4), pp. 273-280. 1478-422X.
• Mills, D. J. (2009) EuroCorr 2008: managing corrosion for sustainability - part 3. Corrosion Engineering, Science and Technology. 44(2), pp. 81-87. 1478-422X.
• Mills, D. J. (2009) EuroCorr 2008: managing corrosion for sustainability - part 4. Corrosion Engineering, Science and Technology. 44(4), pp. 241-246. 1478-422X.
• Mills, D. J. (2009) EuroCorr 2009: from the nanoscale to the plant. Corrosion Engineering, Science and Technology. 44(6), pp. 403-404. 1478-422X.
• Mills, D. J. (2007) Eurocorr 2006: “Reliability management of technical systems” - Part 1. Corrosion Engineering Science and Technology. 42(1), pp. 6-11. 1478-422X.
• Mills, D. J. (2007) Eurocorr 2006: “Reliability management of technical systems” - Part 2. Corrosion Engineering Science and Technology. 42(1), pp. 92-98. 1478-422X.
• Mills, D. J. (2007) Eurocorr 2006: “Reliability management of technical systems” - Part 3. Corrosion Engineering Science and Technology. 42(1), pp. 185-190. 1478-422X.
• Mills, D. J. (2010) Eurocorr 2009: 'Corrosion from the nanoscale to the plant' – part 2. Corrosion Engineering, Science and Technology. 45(1), pp. 3-9. 1478-422X.
• Mills, D. J. (2010) Eurocorr 2009: 'Corrosion from the nanoscale to the plant' – part 3. Corrosion Engineering, Science and Technology. 45(2), pp. 107-112. 1478-422X.
• Mills, D. J. (2010) Eurocorr 2009: 'Corrosion from the nanoscale to the plant' – part 4. Corrosion Engineering, Science and Technology. 45(3), pp. 183-186. 1478-422X.
• Mills, D. J. (2010) Eurocorr 2009: 'Corrosion from the nanoscale to the plant' – part 5. Corrosion Engineering, Science and Technology. 45(4), pp. 251-256. 1478-422X.
• Mills, D. J. (2007) Let it rust! Corrosion Management. 79, p. 8. 1355-5243.
• Mills, D. J. (2010) Member of BSI Committee STI/10. British Standards Institution. (Unpublished)
• Mills, D. J. (2010) Member of BSI Committee STI/27. British Standards Institution. (Unpublished)
• Mills, D. J. (2010) Member of European Committee for ISO TC35 SC9 WG29. International Standards Organisation. (Unpublished)
• Mills, D. J. (2010) Monitoring methods for protective coatings. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 16 July 2010. (Unpublished)
• Mills, D. J. (2010) Monitoring of anti-corrosive coatings using electrochemical techniques. Invited Presentation presented to: Institute of Corrosion’s Corrosion Engineering Division Symposium on Corrosion Monitoring, Warrington, England, 29 April 2010. (Unpublished)
• Mills, D. J. (2010) Report on EuroCorr 2010 held in Moscow 13th-17th September. Corrosion Management. 98, pp. 6-7. 1355-5243.
• Mills, D. J. (2008) Use of electrochemical methods to monitor the performance of organic coatings in the field. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, 17 January 2008. (Unpublished)
• Mills, D. J. (2009) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Lecture presented to: Technical University of Gdansk, Gdansk, Poland, June 2009. (Unpublished)
• Mills, D. J. (2009) Use of electrochemical noise method (ENM) to assess and monitor anti-corrosive organic coatings. Lecture presented to: 8th MULTIPROTECT Training Course on the Use of Electrochemical Techniques (part of 6th International Workshop on Application of Electrochemical Techniques to Organic Coatings (AETOC 2009)), Grado, Italy, 15 April 2009. (Unpublished)
• Mills, D. J. and Bingham, R. (2016) Editorial. Progress in Organic Coatings. 102(A), p. 1. 0300-9440.
• Mills, D. J., Broster, M. and Razaq, I. (2008) Continuing work to enable electrochemical methods to be used to monitor the performance of organic coatings in the field. Progress in Organic Coatings. 63(3), pp. 267-271. 0300-9440.
• Mills, D. J., Broster, M. and Rosaq, I. (2007) Continuing work to enable electrochemical methods to be used to monitor the performance of organic coatings in the field. In: Proceedings of Advances in Electrochemical Techniques to Examine Organic Coatings. Vigo, Spain: University of Vigo.
• Mills, D. J. and Donoghue, S. S. (2007) Investigation into environmental interaction of organic coatings using novel techniques. In: Proceedings of The European Corrosion Congress (Eurocorr 2007). Frankfurt am Main, Germany: Dechema.
• Mills, D. J. and Hilbert, L. (2007) 14th Nordic Corrosion Congress. Corrosion Engineering Science and Technology. 42(4), pp. 283-284. 1478-422X.
• Mills, D. J. and Jamali, S. (2010) Effect of different surface preparations prior to painting on the corrosion behaviour and surface activity of mild steel. In: Proceedings of EUROCORR 2010: From Space Heights to Earth's Depths. Frankfurt, Germany: Dechema.
• Mills, D. J. and Jamali, S. (2010) Effect of different surface preparations prior to painting on the corrosion behaviour and surface activity of mild steel. In: Proceedings of EUROCORR 2010: From Space Heights to Earth's Depths :. SWE: Dechema.
• Mills, D. J. and Jamali, S. (2010) Electrochemical characterization of mild steel after different surface preparations. Paper presented to: 51st Corrosion Science Symposium (CSS), University of Southampton, England, 01-03 September 2010. (Unpublished)
• Mills, D. J., Jamali, S. and Paprocka, K. (2012) Investigation into the effect of nano-silica on the protective properties of polyurethane coatings. Surface and Coatings Technology. 209, pp. 137-142. 0257-8972.
• Mills, D. J., Jamali, S. and Tobiszewski, M. T. (2012) Developing electrochemical measurements in order to assess anti-corrosive coatings more effectively. Progress in Organic Coatings. 74(2), pp. 385-390. 0300-9440.
• Mills, D. J. and Jamali, S. S. (2016) The best tests for anti-corrosive paints. And why: a personal viewpoint. Progress in Organic Coatings. 102(Part A) 0300-9440.
• Mills, D. J. and Jamali, S. S. (2016) The best tests for anti-corrosive paints. And why: a personal viewpoint. Progress in Organic Coatings. 102(Part A) 0300-9440.
• Mills, D. J. and Lyon, S. (2007) The industrial coatings applicator training scheme. Investigation to promote a link with WJA. Paper presented to: Water Jetting Association Annual Conference (WJA) , Lutterworth, Leicestershire, 18 May 2007. (Unpublished)
• Mills, D. J., Mabbutt, S. J. and Bierwagen, G. (2003) Investigation into mechanism of protection of pigmented alkyd coatings using electrochemical and other methods. Progress in Organic Coatings. 46(3), pp. 176-181. 0300-9440.
• Mills, D. J., Paprocka, K. and Jamali, S. (2011) Investigation into the effect of nano-silica particles on the protective properties of polyurethane coatings. In: EUROCORR 2011: Developing Solutions for the Global Challenge. Stockholm, Sweden: Dechema.
• Mills, D. J. and Schaefer, K. (2008) Investigation into influence of different surface preparation method on performance of anti – corrosive organic coatings on steel. Poster presented to: EUROCORR 2008: Managing Corrosion for Sustainability, Edinburgh, 7-11 September 2008. (Unpublished)
• Mills, D. J. and Schaefer, K. (2009) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Invited Presentation presented to: Sixth International Workshop on Application of Electrochemical Techniques to Organic Coatings (AETOC 2009), Grado, Italy, 15 - 18 April 2009. (Unpublished)
• Mills, D. J. and Schaefer, K. (2010) Use of electrochemical methods to examine different surface preparation methods for organic coatings on steel. Progress in Organic Coatings. 69(2), pp. 193-198. 0300-9440.
• Mills, D. J. and Woodcock, C. P. (2008) Use of electrochemical noise method and electrochemical impedence spectroscopy for investigation of a set of organic coatings on steel. In: Proceedings of the EuroCorr 2008 - Managing Corrosion for Sustainability. Dechema.
• Mills, D. J., Woodcock, C. P. and Jamali, S. (2009) Novel arrangements and data analysis methods to enable the electrochemical noise method to assess coatings more effectively. Paper presented to: European Corrosion Congress (EUROCORR) 2009, Nice, France, 6-10 September 2009. (Unpublished)
• Mills, D. J., Schaefer, K. and Wityk, T. (2021) In-Situ Evaluation of the Protectivity of Coatings Applied to Metal Cultural Artefacts Using Non-Destructive Electrochemical Measurements. Corrosion and Materials Degradation. 2(1), pp. 120-132. 2624-5558.
• Mintz, B., Gunawardana, W. D. and Su, H. (2008) Al as solid solution hardener in steels. Materials Science and Technology. 24(5), pp. 596-600. 0267-0836.
• Mintz, B., Gunawardana, W. D. and Su, H. (2008) Influence of Al on strength and impact behaviour of hot rolled plain C-Mn steels. Materials Science and Technology. 24(5), pp. 601-606. 0267-0836.
• Mirhadizadeh, S. and Kaczmarczyk, S. (2014) Mathematical modelling and computer simulation of nonlinear behaviour of a hoisting cable system. Paper presented to: ICNPAA 2014 World Congress: 10th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences, Narvik, Norway, 15-18 July 2014. (Unpublished)
• Missler, J., Ehrl, T., Meier, B., Kaczmarczyk, S. and Sawodny, O. (2017) Control of actuators for cabin vibration damping of a rope-free passenger transportation system. Lift and Escalator Symposium. 7 2052-7225.
• Missler, J., Ehrl, T., Meier, B., Kaczmarczyk, S. and Sawodny, O. (2017) Control of actuators for cabin vibration damping of a rope-free passenger transportation system. Lift and Escalator Symposium. 7 2052-7225.
• Missler, J., Ehrl, T., Meier, B., Kaczmarczyk, S. and Sawodny, O. (2016) Modelling of a rope-free passenger transportation system for active cabin vibration damping. Lift and Escalator Symposium. 6 2052-7225.
• Missler, J., Ehrl, T., Meier, B., Kaczmarczyk, S. and Sawodny, O. (2016) Modelling of a rope-free passenger transportation system for active cabin vibration damping. Lift and Escalator Symposium. 6 2052-7225.

N

• Nolle, L., Goodyear, A., Hopgood, A. A., Picton, P. and Braithwaite, N. S. J. (2002) Automated control of an actively compensated Langmuir probe system using simulated annealing. Knowledge-Based Systems. 15(5-6), pp. 349-354. 0950-7051.
• Nolle, L., Goodyear, A., Hopgood, A. A., Picton, P. and Braithwaite, N. S. J. (2005) Improved simulated annealing with step width adaptation for Langmuir probe tuning. Engineering Optimization. 37(5), pp. 463-477. 1029-0273.
• Nowicki, A. and Bennecer, A. (2017) Modeling of electro-thermal microbolometer for thermal imaging. Poster presented to: COSMOL Conference 2017, Rotterdam, 18-20 October 2017.

O

• Ostachowicz, W. and Kaczmarczyk, S. (2001) Vibrations of composite plates with SMA fibres in a gas stream with defects of the type of delamination. Composite Structures. 54(2-3), pp. 305-311. 0263-8223.
• Oyeniyan, A., Olamide, A. and Bennecer, A. (2018) Fatigue Assessment of Welded Pipelines in Ultra-Deep Water. Other presented to: COMSOL Conference, 2018-10-22 - 2018-10-24.

P

• Petford, N. and Mirhadizadeh, S. (2017) Image based modelling of lateral magma flow: the Basement Sill, Antarctica. Royal Society Open Science. 4 2054-5703.
• Petford, N. and Mirhadizadeh, S. (2017) Image based modelling of lateral magma flow: the Basement Sill, Antarctica. Royal Society Open Science. 4 2054-5703.
• Picton, P. (2013) Calculating the relative energy and amplitude of ultrasonic waves at boundaries. In: Smallbone, C. and Dick, L. (eds.) Proceedings of the 1st Australasian International Welding, Inspection and NDT Conference. Australia: Welding Technology Institute of Australia & Australian Institute for Non-Destructive Testing.
• Picton, P. (2013) Courses for the NDT industry. In: Smallbone, C. and Dick, L. (eds.) Proceedings of the 1st Australasian International Welding, Inspection and NDT Conference. Australia: Welding Technology Institute of Australia & Australian Institute for Non-Destructive Testing.
• Picton, P. (2012) Teaching ultrasonics using spreadsheets. In: Bjorkqvist, J., Laakso, M.-J., Roslöf, J., Tuohi, R. and Virtanen, S. (eds.) International Conference on Engineering Education 2012 Proceedings :. Turku, Finland: Turku University of Applied Sciences. pp. 954-959.
• Picton, P. (2012) Teaching ultrasonics using spreadsheets. In: Bjorkqvist, J., Laakso, M.-J., Roslöf, J., Tuohi, R. and Virtanen, S. (eds.) International Conference on Engineering Education 2012 Proceedings :. Turku, Finland: Turku University of Applied Sciences. pp. 954-959.
• Picton, P. and Capp, M. (2008) Relaying scene information to the blind via sound using cartoon depth maps. Image and Vision Computing. 26(4), pp. 570-577. 0262-8856.
• Picton, P. and Kaczmarczyk, S. (2011) A software tool for calculating the relative amplitude of ultrasonic waves at boundaries. In: Crocker, M. J., Pawelczyk, M. and Ivanov, N. (eds.) Proceedings of the 18th International Congress on Sound and Vibration. Rio de Janeiro, Brazil: Curran Associates Inc. 9781618392596. pp. 2263-2270.
• Picton, P. and Zaid, M. (2010) The development of courses for the NDT industry in collaboration with the industry body and the students themselves. In: Proceedings of the International Conference on Engineering Education (ICEE 2010). 1562-3580.
• Poulton, L., Rybdylova, O., Zubrilin, I.A., Matveev, S.G., Gurakov, N.I., Al Qubeissi, M., Al-Esawi, N., Khan, T., Gun’ko, V.M. and Sazhin, S.S. (2020) Modelling of multi-component kerosene and surrogate fuel droplet heating and evaporation characteristics: A comparative analysis. Fuel. 269 0016-2361.

Q

• Quainoo, P., Petford, N., Kaczmarczyk, S. and Elbanhawy, E. (2019) A Revision to European Building Code EN1991 for Static and Dynamic Roof Loading by Volcanic Ash. Poster presented to: The Volcanic and Magmatic Studies Group International Annual Meeting, University of St Andrews, 2019-01-08 - 2019-01-10.

R

• Remy, G., Kazemian, H. and Picton, P. (2010) Application of neural fuzzy controller for streaming video over bluetooth 1.2. Neural Computing and Applications. 19(10) 0941-0643.

S

• Samamaliki-Simpson, R., Kaczmarczyk, S., Picton, P. and Turner, S. J. (2006) Non-linear modal interactions in a suspension rope system with time-varying length. Applied Mechanics and Materials. 5-6, pp. 217-224. 1660-9336.
• Schaefer, K. and Mills, D. J. (2008) The influence of water jetting on subsequent performance of organic coatings on steel. Symposium presented to: University of Northampton Research Day, Northampton, 1 July 2008. (Unpublished)
• Schaefer, K. and Mills, D. J. (2016) The application of organic coatings in conservation of archaeological objects excavated from the sea. Progress in Organic Coatings. 102(Part A) 0300-9440.
• Schaefer, K. and Mills, D. J. (2016) The application of organic coatings in conservation of archaeological objects excavated from the sea. Progress in Organic Coatings. 102(Part A) 0300-9440.
• Shi, Y., Korakianitis, T., Li, Z. and Shi, Y. (2019) Structure and motion design of a mock circulatory test rig. Journal of medical engineering & technology. 42(6), pp. 443-452. 0309-1902.
• Singh, N., Kaczmarczyk, S. and Ehrl, T. (2017) An analysis of airflow effects in lift systems. Lift and Escalator Symposium. 7 2052-7225.
• Singh, N., Kaczmarczyk, S. and Ehrl, T. (2017) An analysis of airflow effects in lift systems. Lift and Escalator Symposium. 7 2052-7225.
• Smith, R. and Kaczmarczyk, S. (2008) Actively damped tension member. USA. 16 May 2008. Patent number 60/938,305.
• Smith, R. and Kaczmarczyk, S. (2008) Method and apparatus to minimize compensation rope sway in elevators. USA. 15 September 2008. Patent number 60/972,495.
• Smith, R. and Kaczmarczyk, S. (2007) Method and apparatus to minimize compensation rope sway through tendon control in elevators. USA. 14 September 2007. Patent number 60/972,506.
• So, A., Chan, R. and Kaczmarczyk, S. (2018) Computer Simulation Aided Study of a Real-time Energy Benchmarking Parameter for Lift Systems under different Traffic Control Schemes. Transportation Systems in Buildings. 2(1), pp. 1-23. 2631-8156.
• Su, H. and Banerjee, R. (2015) Derivation of the Dynamic Stiffness Matrix of a Functionally Graded Beam using Higher Order Shear Deformation Theory. In: Kruis, J., Tsompanakis, Y. and Topping, B.H.V. (eds.) Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing :. CZE: Civil-Comp Proceedings. pp. 1-12.
• Su, H. and Banerjee, R. (2015) Development of dynamic stiffness method for free vibration of functionally graded Timoshenko beams. Computers & Structures. 147, p. 107. 0045-7949.
• Su, H. and Banerjee, R. (2018) The modal characteristics of high aspect ratio sailplane wings including the effects of bending and torsional rigidities. Journal of Radiological Protection. , p. 1. 0952-4746.
• Sánchez Crespo, R., Kaczmarczyk, S. and Picton, P. (2014) The coupled nonlinear dynamics of a lift system. Paper presented to: ICNPAA 2014 World Congress: 10th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences, Narvik University, Norway, 15-18 July 2014. (Unpublished)
• Sánchez Crespo, R., Kaczmarczyk, S., Picton, P. and Su, H. (2014) Modelling and simulation of a nonstationary high-rise elevator system to predict the dynamic interactions between its components. In: Kaczmarczyk, S. and Peters, R. (eds.) Symposium on Lift and Escalator Technologies: Volume 4. Northampton, UK: The University of Northampton, CIBSE Lifts Group. 2052-7225. pp. 175-182.
• Sánchez Crespo, R., Kaczmarczyk, S., Picton, P. and Su, H. (2018) Modelling and simulation of a stationary high-rise elevator system to predict the dynamic interactions between its components. International Journal of Mechanical Sciences. 137, pp. 24-45. 0020-7403.
• Sánchez Crespo, R., Kaczmarczyk, S., Picton, P. and Su, H. (2018) Modelling and simulation of a stationary high-rise elevator system to predict the dynamic interactions between its components. International Journal of Mechanical Sciences. 137, pp. 24-45. 0020-7403.
• Sánchez Crespo, R., Kaczmarczyk, S., Picton, P. and Su, H. (2015) Modelling and simulation of the nonstationary behaviour of high-rise elevator systems to predict the dynamic interactions between their components. Invited Presentation presented to: 5th Symposium on the Mechanics of Slender Structures (MoSS2015)), Northampton, UK, 21-22 September 2015. Northampton: The University of Northampton.
• Sánchez Crespo, R., Kaczmarczyk, S., Picton, P. and Su, H. (2014) The coupled nonlinear dynamics of a lift system. In: 10th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences: ICNPAA 2014. Melville, NY: AIP Publishing LLC. 9780735412767. pp. 245-252.
• Sánchez Crespo, R., Kaczmarczyk, S., Picton, P., Su, H. and Jetter, M. (2013) Modelling and simulation of a high-rise elevator system to predict the dynamic interactions between its components. Paper presented to: 3rd Symposium on Lift and Escalator Technologies 2013, Northampton, UK, 2013-09-23.
• Sánchez Crespo, R., Kaczmarczyk, S., Picton, P., Su, H. and Jetter, M. (2013) Modelling and simulation of a high-rise elevator system to predict the dynamic interactions between its components. Paper presented to: 3rd Symposium on Lift and Escalator Technologies 2013, Northampton, UK, 2013-09-23.

T

• Taniuch, T., Terumichi, Y., Sogabe, K., Takehara, S. and Kaczmarczyk, S. (2008) Motion and control of a tethered system with fluid drag. In: Proceedings of the 4th Asian Conference on Multibody Dynamics.
• Terumichi, Y., Kaczmarczyk, S. and Sogabe, K. (2010) Numerical approach for flexible body motion with time-varying length and large displacement using multiple time scales. In: Proceedings of the 1st Joint International Conference on Multibody System Dynamics.
• Terumichi, Y., Takehara, S., Kaczmarczyk, S. and Sogabe, K. (2009) Absolute nodal coordinate formulation for flexible bodies with time-varying length using multiple nonlinear time scales. In: Proceedings of the 1st African Conference on Computational Mechanics (AfriCOMP2009).
• Torres Perez, A. (2015) Active vibration control for a free piston stirling engine generator using a voice coil actuator. Modern Machinery (MM) Science Journal. March 2015, pp. 547-554. 1805-0476.
• Torres Perez, A., Hassan, A., Kaczmarczyk, S. and Picton, P. (2016) Active vibration control using mechanical and electrical analogies. Paper presented to: 5th Symposium on the Mechanics of Slender Structures (MoSS2015)), The University of Northampton, 2015-09-21 - 2015-09-22.
• Torres Perez, A., Kaczmarczyk, S. and Smith, R. (2021) Automatic Fault Detection and Classification in Lift Door Systems Using Vibration Signal Features. In: P, R. and A, M. (eds.) 10th European Workshop on Structural Health Monitoring, EWSHM 2020 : Lecture Notes in Civil Engineering. Springer International. pp. 765-775.
• Torres Pérez, A., García-Atance Fatjó, G., Hadfield, M. and Austen, S. (2011) A model of friction for a pin-on-disc configuration with imposed pin rotation. Mechanism and Machine Theory. 46(11), pp. 1755-1772. 0094-114X.
• Torres Pérez, A., Hassan, A., Kaczmarczyk, S. and Picton, P. (2018) Energy efficient active vibration control strategies using electromagnetic linear actuators. Journal of Physics: Conference Series. 1048(012011), pp. 1-14. 1742-6588.
• Torres Pérez, A., Hassan, A., Kaczmarczyk, S. and Picton, P. (2017) Energy efficient active vibration control strategies using electromagnetic linear actuators. Symposium presented to: Symposium on Mechanics of Slender Structures (MoSS) 2017, Merida, Spain, 14-15 December 2017.
• Torres Pérez, A., Hassan, A., Kaczmarczyk, S. and Picton, P. (2018) Energy efficient active vibration control strategies using electromagnetic linear actuators. Journal of Physics: Conference Series. 1048(12011), pp. 1-15. 1742-6588.
• Torres Pérez, A., Hernández Battez, A., García-Atance, G., Viesca, J. L., González, R. and Hadfield, M. (2011) Use of optical profilometry in the ASTM D4172 standard. Wear. 271(11-12), pp. 2963-2967. 0043-1648.
• Turner, S. J. and Adams, J. P. (2008) Robots and problem solving. In: 9th Annual Conference of the Subject Centre for Information and Computer Sciences. Newtownabbey: Higher Education Academy, Subject Centre for Information and Computer Sciences. 9780955967603. p. 16.
• Turner, S. J., Hill, G. and Adams, J. P. (2009) Robots in problem solving in programming. Paper presented to: Higher Education Academy Subject Centre for Information and Computer Sciences 9th 1-day Teaching of Programming Workshop, Bath, 6 April 2009. (Unpublished)

V

• Varley, M., Peak, M. and Picton, P. (2010) Enhancing student understanding of concepts in engineering and other STEM areas. In: Proceedings of the International Conference on Engineering Education (ICEE 2010). 1562-3580.
• Viesca, J. L., Hernández Battez, A., González, R., Reddyhoff, T., Torres Pérez, A. and Spikes, H. A. (2010) Assessing boundary film formation of lubricant additivised with 1-hexyl-3-methylimidazolium tetrafluoroborate using ECR as qualitative indicator. Wear. 269(1-2), pp. 112-117. 0043-1648.

W

• Wang, Y., Picton, P., Turner, S. J. and Attenburrow, G. E. (2007) A neural network approach to investment the objective and subjective measurements of leather handle. In: Proceedings of the Symposium on Methods of Artificial Intelligence, AIMETH 2007. Poland: Silesian University of Technology. pp. 241-246.
• Warner, C., Vick, H., Walker, A. and Hill, K. M. (2018) Contribution of ‘Real Nappies for London’ to Local Authority waste prevention - 2012–2016. Proceedings of the Institution of Civil Engineers - Waste and Resource Management. 170(3 & 4), pp. 119-127. 1747-6526.
• Warner, C., Vick, H., Walker, A. and Hill, K. M. (2018) Contribution of ‘Real Nappies for London’ to Local Authority waste prevention - 2012–2016. Proceedings of the Institution of Civil Engineers - Waste and Resource Management. 170(3 & 4), pp. 119-127. 1747-6526.
• Warriner, D., Brown, A.G., Varma, S., Sheridan, P.J., Lawford, P., Hose, D.R. and Shi, Y. (2014) Closing the Loop: Modelling of Heart Failure Progression from Health to End-Stage Using a Meta-Analysis of Left Ventricular Pressure-Volume Loops. PLoS ONE. 9(12), pp. 1-22. 1932-6203.
• Weber, H., Iwankiewicz, R. and Kaczmarczyk, S. (2018) Equivalent linearization technique in nonlinear stochastic dynamics of a cable-mass system with time-varying length. In: Wiśniewski, K. and Burczyński, T. (eds.) 41st Solid Mechanics Conference Book of Abstracts :. Warsaw, Poland: Institute of Fundamental Technological Research, Polish Academy of Sciences. pp. 460-461.
• Weber, H., Iwankiewicz, R. and Kaczmarczyk, S. (2018) Equivalent linearization technique in nonlinear stochastic dynamics of a cable-mass system with time-varying length. In: Wiśniewski, K. and Burczyński, T. (eds.) 41st Solid Mechanics Conference Book of Abstracts :. Warsaw, Poland: Institute of Fundamental Technological Research, Polish Academy of Sciences. pp. 460-461.
• Weber, H., Kaczmarczyk, S. and Iwankiewicz, R. (2020) Non-linear dynamic response of a cable system with a tuned mass damper to stochastic base excitation via equivalent linearization technique. Meccanica. 55(12), pp. 2413-2422. 0025-6455.
• Weber, H., Kaczmarczyk, S. and Iwankiewicz, R. (2020) Non-linear stochastic dynamics of a cable-mass system with finite bending stiffness via the equivalent linearization technique. Journal of Theoretical and Applied Mechanics. 58(2), pp. 483-497. 1429-2955.
• Wood, E., Kaczmarczyk, S., Stonnell, M. and Zaid, M. (2008) Conveying of granular material using a periodically forced oscillator with dry friction. In: Proceedings of the International Conference on Noise and Vibration Engineering (ISMA 2008). ISMA.
• Wood, E., Kaczmarczyk, S., Stonnell, M., Zaid, M. and Hollis, R. (2008) Conveying of granular material using a periodically forced oscillator with dry friction. In: Sas, P. and Bergen, B. (eds.) Proceedings of the International Conference on Noise and Vibration Engineering (ISMA 2008) :. BEL: ISMA. pp. 3553-3566.
• Woodcock, C. P., Mills, D. J. and Singh, H. T. (2008) Using novel electrochemical test methods to aid in the development of low volatile organic compound (VOC) coatings. Journal of Corrosion Science and Engineering. 8 1466-8858.

Z

• Zaid, M., El-Madaani, F., Gaydecki, P. and Miller, G. (2006) Automatic corrosion classification and quantification of steel reinforcing bars within concrete using image data generated by an inductive sensor. In: Thompson, D. O. and Chimenti, D. E. (eds.) Review of Progress in Quantitative Nondestructive Evaluation: Brunswick, Maine, 31 July - 5 August, 2005. Melville, New York: American Institute of Physics. 0735403120. pp. 1313-1320. (AIP conference proceedings, vol. 820)
• Zaid, M., Gaydecki, P., Quek, S., Miller, G. and Fernandes, B. (2004) Extracting dimensional information from steel reinforcing bars in concrete using neural networks trained on data from an inductive sensor. NDT & E International. 37(7), pp. 551-558. 0963-8695.
• Zaid, M., Gaydecki, P., Quek, S., Miller, G. and Fernandes, B. (2002) Image reconstruction of steel reinforcing bars in concrete using Fourier-domain interpolation applied to a sparsely populated data set. Nondestructive Testing and Evaluation. 18(3-4), pp. 119-130. 1058-9759.
• Zhu, W. and Kaczmarczyk, S. (2009) Conference on the Mechanics of Slender Structures (MoSS2008). Elevator World. LVII(2), pp. 20-24. 0013-6158.